Hi i need schematic for HP 612 G2 X2
my ntb is not charging or turning on, If the battery is charged, the laptop works normally. I have already seen the forum about it, but unfortunately it did not help, in another post, when I disconnected the battery, the ntb worked, but my charging is via USB C. I have V on the board, but then the values are small, 0.4v and 0.0v, I do not have the measured values of 0.0V on the BQ charging chip. I have 5v at the output of the USB C connector, so the connector is good.
my ntb is not charging or turning on, If the battery is charged, the laptop works normally. I have already seen the forum about it, but unfortunately it did not help, in another post, when I disconnected the battery, the ntb worked, but my charging is via USB C. I have V on the board, but then the values are small, 0.4v and 0.0v, I do not have the measured values of 0.0V on the BQ charging chip. I have 5v at the output of the USB C connector, so the connector is good.
