HP TPN-Q286 DA0PDIMB8G0 REV:G

[5m44p1x]

Hi guys, is there anyone who is willing to share the schematics and boardview file with me? Thank you.
Currently mine draws up to 0.5A current and then go to 0, and repeat this process. any ideas?

[mon2]

Remove all power. Meter in resistance mode. Check the resistance to ground of each and every inductor on the board. You are checking for a possible shorted power rail.

[5m44p1x]

Remove all power. Meter in resistance mode. Check the resistance to ground of each and every inductor on the board. You are checking for a possible shorted power rail.

Thank you for your reply. Actually I found one inductor with the reading of 0.001 on diode mode, and by removing it, the upstream is 0.2xx and downstream of it is still 0.001, CPU seems to be the downstream part but need confirmation, so that's why I needed the schematic : )

[Aziz aj]

DA0PDiMB8G0 REV-G MODEL- opdi hp 250 g10 need ok bios

[SMDFlea]

Post your request in the "Bios requests ONLY!" forum.Read the rules beforehand https://www.badcaps.net/forum/troubl...before-posting