New Members
Please consider donating to this site if it has helped you. We rely on these donations.
Please also introduce yourself here Introduce yourself here.
And finally, Read the Forum rules here.
I checked everywhere I can think of and cannot find it on anything other than those paids sites. I think you'll just have to hope somebody here has it in their inventory somewhere.
Good day all, with the help of schematic diagram I detected a shorted capacitor at GFX COREP section, here is the location,
And again, thanks vvacl [/IMG]
Congrats! How did you identify that specific capacitor? I have a water damaged C660 with lots of blackened caps and could use a few tips!
All I did was just removing the coils over 19V rail one by one, thanks to the desing of compal motherboards I was easily able to see where the short is.
Hlw every1 ..
i have a board ..toshiba. Part No nbqaa la-6071p rev: 1.0.
After press the power display comes but the problem is after 10 second fan spinning fast and turn of the display .. i do bios ...same result .. then i clear me the bios ..but same result ... anybody help .... thanks all
Hi guys, I'm working on a MSI Ventus RTX 4080 16G. The GPU has 12v, 5v, however what I assume is the 1.8v rail has 1.1v and what I assume to be PEX is 0v. As you may have guessed already there is no Vmem and no Vcore.
I have looked around in related forum posts for a schematic so Much appreciated if anyone can share a Broadview schematic.
Comment