Here is the Boardview
-
-
Re: Lenovo COMPAL La-B091P Boardview
Thanks -
la-b091p boardview pls
pdf available i need .fz/.tvw or .brd fileComment
-
Hello , i need Lenovo la-b091p rev 2 Boardview . Reason i need is board had a short near cpu (pl801 two caps and one resistor cracked) . Cpu doesnt get any voltage when i give start to laptop. No heat or voltage on cpu.
I hope you can help me with boardview file. Thanks.Comment
-
Hello,
I got a Lenovo ThinkStation P520 (Type 30BF) from a friend, asking me for a repair. Windows 11 offered a firmware upgrade as an optional update, and it failed.
The emergency flash procedure from the hardware manual has also failed. So, I asked an acquaintance with better skills to flash the BIOS directly.
However, the chip (a Macronix MX25L25673GMI-08G) has a size of 32 MB, and the BIOS file from the Lenovo website (extracted with UEFITool) has a little more than 16 MB. Thus, the software my acquaintance used (SiberiaProg v1.45, with a CH341A Programmer)... -
Lenovo IdeaPad Gaming 3 16IAH7 Compal HLG10 LA-L911P Rev 1.0 BoardView... -
I'm trying to extract a flashable bios file(ch341a) from the lenovo bios executable download. I have tried the instructions from this site https://starkeblog.com/lenovo/uefi/2...pdate-exe.html, which are not working. According to those instructions, after issuing the commandit should create an \app folder, inside which, I should find a newly created "7wcn38ww.exe" file. I should then be able to extract that using 7zip and find my .FD file.Code:
"innoextract 7wcn38ww.exe"
The trouble I'm having is that I'm not getting the newly... -
I need schematics and board view for these models. Please anyone got these files.
Thanks
lenovo miix 310-10icr boardview
lenovo miix 320-10icr boardview
lenovo d330-10igm boardview​ -
I'm working on a Lenovo LOQ 15APH8, Serial# MP2L9MAV. I want to flash a new BIOS onto it, but I'm also trying to learn this process for my own enrichment and professional development.
I was watching some tutorials, copying the serial info blocks from the old bios to a new bios. Before that though, they use innoextract on the Lenovo .exe. I downloaded Innoextract v1.9 but it tells me my .exe is not a supported inno setup installer(see screenshot). So if I unpack this using 7zip, I do get a .ROM file, but according to my tutorials, I'm looking for a .FD file.
How can...
Comment