Announcement

Collapse
No announcement yet.

asus Zenbook Flip 13 UX363 bios backup

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • R34P3R
    replied
    Hi guys,

    The batt is not charging after bios update. please help.

    UX363EA

    SN: 12M
    L9N0CX08B56039B
    MFD: 2020-09

    Attached Files

    Leave a comment:


  • peste
    commented on 's reply
    from 3.3v...to 1.8v...

  • peste
    replied
    Originally posted by Jeanswieg View Post

    Thank you, will get back to you as soon as possible. I have a black ch341a, do i need to convert it from 5v to 3.3v before flashing?
    I don't know..see what voltage the bios chip is powered at on pin 8

    Leave a comment:


  • Jeanswieg
    replied
    Originally posted by peste View Post

    you need an SPI programmer...here is a video for example..https://www.youtube.com/watch?v=DWWi...nnel=ThisIsHow
    Thank you, will get back to you as soon as possible. I have a black ch341a, do i need to convert it from 5v to 3.3v before flashing?

    Leave a comment:


  • peste
    replied
    Originally posted by Jeanswieg View Post

    Thanks so much for the assistance, i will send you everything you need, i just need to know how to get the bios contents for you?

    Asus Zenbook flip 13 i7-1165G7, 16GB RAM UX363EA
    S/N: L9N0CX08B56039B
    you need an SPI programmer...here is a video for example..https://www.youtube.com/watch?v=DWWi...nnel=ThisIsHow

    Leave a comment:


  • Jeanswieg
    replied
    Originally posted by peste View Post

    post S/N, full name and model, motherboard model,post the contents of the bios chip even if it is corrupted.. etc.
    Thanks so much for the assistance, i will send you everything you need, i just need to know how to get the bios contents for you?

    Asus Zenbook flip 13 i7-1165G7, 16GB RAM UX363EA
    S/N: L9N0CX08B56039B

    Leave a comment:


  • peste
    replied
    Originally posted by Jeanswieg View Post
    Hi guys I have a similar issue. I updated the bios (version 326 note sure from which version) and now my laptop won't charge and battery is at 0% constantly, i thought it was the battery, but i bought a new one and same issue. I would appreciate some assistance in dumping my bios and sending to you for fix so i can flash again? Thanks in advance.

    Asus Zenbook Flip 13 UX363EA

    post S/N, full name and model, motherboard model,post the contents of the bios chip even if it is corrupted.. etc.

    Leave a comment:


  • Jeanswieg
    replied
    Hi guys I have a similar issue. I updated the bios (version 326 note sure from which version) and now my laptop won't charge and battery is at 0% constantly, i thought it was the battery, but i bought a new one and same issue. I would appreciate some assistance in dumping my bios and sending to you for fix so i can flash again? Thanks in advance.

    Asus Zenbook Flip 13 UX363EA


    Leave a comment:


  • minhdigital
    replied
    Originally posted by yaaqbeh View Post

    thanks but not work
    Send to you
    Attached Files

    Leave a comment:


  • SMDFlea
    commented on 's reply
    Try this - Disable VMD in bios settings or install RST drivers during windows install https://www.asus.com/support/faq/1044458/

  • yaaqbeh
    replied
    Originally posted by hoaca388 View Post

    UX363EA
    thanks but not work

    Leave a comment:


  • hoaca388
    replied
    Originally posted by yaaqbeh View Post
    hi
    i need fix bios
    not detect m.2 nvme
    s/n
    lbn0cx20n80348d
    UX363EA
    Attached Files

    Leave a comment:


  • yaaqbeh
    replied
    hi
    i need fix bios
    not detect m.2 nvme
    s/n
    lbn0cx20n80348d
    Attached Files

    Leave a comment:


  • peste
    replied
    Originally posted by Kaasis View Post
    Hello.

    Please fix bios
    Doesn't boot

    I installed a different bios, but the battery does not charge and does not show a connected NVME disk

    post the S/N, the motherboard model, the full name and model of the laptop,etc.

    Leave a comment:


  • Kaasis
    replied
    Hello.

    Please fix bios
    Doesn't boot

    I installed a different bios, but the battery does not charge and does not show a connected NVME disk


    Attached Files

    Leave a comment:


  • volinakis
    replied
    Originally posted by jomerfx28 View Post



    Thanks. So i extracted the Bios Region and ME Sub Partition from the original Bios i have to the file you have provided through the correct FIT version, i already did the Build Image, i am partly lost on the last instruction

    "After that transfer DMI to new created bios image." what's DMI. thanks
    serial, snid, win key, etc.
    Attached Files

    Leave a comment:


  • jomerfx28
    replied
    Originally posted by volinakis View Post

    bios is extracted from latest bios update and clean ME. You have to extract bios_region from bios update, then using proper Intel FIT version to your backup (you can find it using MEAnalyzer) replace Bios Region and ME Sub Partition with extracted bios and proper ME firmware and build new bios image. After that transfer DMI to new created bios image.

    Read this guide created by master SMDFlea, in addition to this guide you also have to replace Bios Region with bios_region extracted from bios update in decomposed image created by FIT.

    https://www.badcaps.net/forum/troubl...cleaning-guide


    Thanks. So i extracted the Bios Region and ME Sub Partition from the original Bios i have to the file you have provided through the correct FIT version, i already did the Build Image, i am partly lost on the last instruction

    "After that transfer DMI to new created bios image." what's DMI. thanks

    Leave a comment:


  • volinakis
    replied
    Originally posted by jomerfx28 View Post

    charging flashing gone, when charger plug-in power kicks in - processor will continue to heat up- fan will not work, like POST not functioning well, i checked the fan on direct DC. it worked, the only changed is the charging light indicator gone.
    if im not mistaken - if the processor is gone, or need some reballing.
    bios is extracted from latest bios update and clean ME. You have to extract bios_region from bios update, then using proper Intel FIT version to your backup (you can find it using MEAnalyzer) replace Bios Region and ME Sub Partition with extracted bios and proper ME firmware and build new bios image. After that transfer DMI to new created bios image.

    Read this guide created by master SMDFlea, in addition to this guide you also have to replace Bios Region with bios_region extracted from bios update in decomposed image created by FIT.

    https://www.badcaps.net/forum/troubl...cleaning-guide

    Leave a comment:


  • jomerfx28
    replied
    Originally posted by volinakis View Post

    try
    charging flashing gone, when charger plug-in power kicks in - processor will continue to heat up- fan will not work, like POST not functioning well, i checked the fan on direct DC. it worked, the only changed is the charging light indicator gone.
    if im not mistaken - if the processor is gone, or need some reballing.

    Leave a comment:


  • jomerfx28
    replied
    Originally posted by volinakis View Post

    try
    Thanks. is there a way to learn what your doing? i've got a RT809H programmer, however not fully explore it yet.

    ill try that now.

    Leave a comment:

Working...
X