Please need unlock 830 g8

[b4rdock]

i need unlock Hp Elite Book 830 G8 password bios
this have 32mb main and ec

[peste]

post merged..

[vladutzu08]

Hi everyone , posting here the 2 bios file fom hp elitebook 830 g8 Bios wit no password in case someone needs a clean bios, mainly the 256 mb should be fine but just in case i posted the 8 mb secondary chip also

[hoaca388]

Please help unlock this 830 G8 sn 5CG225A1MT, thanks!

Unlocked

[babydoll8867]

Please help unlock this 830 G8 sn 5CG225A1MT, thanks!

[hoaca388]

Hi everyone, can you help me with my HP 830 g8 password problem and Endopoint Controller Security serial number 5CG1443H8T ? I really appreciate the help.

Password removed and Endopoint Controller Security disable.

[RODAKSAN]

Hi everyone, can you help me with my HP 830 g8 password problem and Endopoint Controller Security serial number 5CG1443H8T ? I really appreciate the help.

[hoaca388]

Greetings, can you help me with my HP 830 g8 password problem and Endopoint Controller Security serial number 5cg1374ZBT board 6050A3217501? I really appreciate the help.

Endopoint Controller Security and password

[marc_ytos]

Greetings, can you help me with my HP 830 g8 password problem and Endopoint Controller Security serial number 5cg1374ZBT board 6050A3217501? I really appreciate the help.

[RODAKSAN]

post main file

Thank you shiyab !

[shiyab]

Thank you, but same issue " HP Endpoint Controller Problem" again :'(

post main file

[RODAKSAN]

try

Thank you, but same issue " HP Endpoint Controller Problem" again :'(

[danito]

Thank you SMDFlea

backup from main BIOS

try

[RODAKSAN]

post your backups

Thank you SMDFlea

backup from main BIOS

[SMDFlea]

Hi, I already replaced the original BIOS with the attached file, now I can enter the BIOS conf, but now mi laptop shows the " HP Endpoint Controller Problem" message, then I done all the process on

https://www.badcaps.net/forum/troubl...security-error

but the message is still showing and then it reboots when you hit the ok button.

Can you help me?
Thank's

post your backups

[RODAKSAN]

Re: Please need unlock 830 g8


>

Hi, I already replaced the original BIOS with the attached file, now I can enter the BIOS conf, but now mi laptop shows the " HP Endpoint Controller Problem" message, then I done all the process on

https://www.badcaps.net/forum/troubl...security-error

but the message is still showing and then it reboots when you hit the ok button.

Can you help me?
Thank's

[qayyum786]

I make your file clean & configure with no VSS2 so any END POINT or NO IMAGE victim can be use for this particular model (Need to Flash EC+MAIN both file)

[zsi3ug4z]

work perfect, thanks you sir.

[qayyum786]

Flash both

[zsi3ug4z]

hi try flash main file

thank you, but no display come. Do i need to flash EC BIOS if it's not original file? I have this laptop from customer with both files were flashed.