-
-
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
Hi everyone, please i need bin file for :
HP pavilion 15
Model : 15-EG0053CL
S/N : 5CD122733Y
Board# : DA0G7HMB8G0 REV: G
Thank you so muchComment
-
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Mọi khoản quyên góp cho badcaps đều được hoan nghênh, hãy nhấp vào liên kết này để quyên góp. Cảm ơn tất cả những người ủng hộ----------------------------------------------------------------------------------------------------------------------------------------------------------------Comment
-
Heyo
I'm trying to perform data rescue on this drive and don't want to make a mistake. I've found a burned diode and a shorted capacitor right next to it. I've found a component on eBay that seems to match up. Can someone confirm please? Also I don't mind replacing it with a compatible component if it's easy to get hold of.
https://www.ebay.de/itm/235070605065
Have a nice day
... -
⚠️ Not a Rescue BIOS. Flash at Your Own Risk. ⚠️
This is not A17.
This is not listed on Dell's support site.
This is an unreleased internal firmware revision recovered from a university loaner Latitude E6530... and it possibly bricked the system it came from.
It is from the 8 MB Winbond W25Q64 chip. Could be nothing burger but given the anomalies this is a very interesting firmware dump.
Firmware collectors and reverse engineers might find this useful, It contains certs, modules, and DXE drivers not present in A17. This is likely... -
Lenovo S540-15 NB8606_MB Schematics Document...10-14-2024, 11:38 AM -
Apple iPhone 3G Maintenance Document / Manual...10-03-2024, 10:05 AM
-
Hi, the pc does not recognize my SSD, I was testing Volt and the SMC_OOB1_D2R_L, and gives 0.03v approx, and it should provide 3.3v I think, what can be the problem? maybe is the resistance (R86101) I cant test it with my multimeter too small, but I don't think that would do the V go to 0.3v, and SMC_OOB1_D2R_L has continuity with the test point. I think all other pins are okay.
Link to schematic/boardview --> https://www.badcaps.net/forum/troubl...-only/71623-82...
Comment