I need DUMP ECS LBook E11IS2

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • skynet85
    Senior Member
    • Jul 2015
    • 124
    • Georgia

    #1

    I need DUMP ECS LBook E11IS2

    E11IS2mb 37GE11000-C0 REV C
    Attached Files
    Last edited by SMDFlea; 10-18-2021, 03:55 AM. Reason: ECS LBook E11IS2
  • peste
    Super Moderator
    • Dec 2016
    • 12665
    • ROMANIA

    #2
    Re: I need DUMP ECS LBook E11IS2

    Originally posted by skynet85
    E11IS2mb 37GE11000-C0 REV C
    post the backup copy of the original laptop bios.
    Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:

    >>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<

    Every donation made will go towards server fees and maintenance costs.

    Comment

    • skynet85
      Senior Member
      • Jul 2015
      • 124
      • Georgia

      #3
      Re: I need DUMP ECS LBook E11IS2

      I will write and post my dump later. I want or am looking for a dump so that there was no logo or picture on the screen during power-on , and in general there is an instruction on how to edit a dump, cut a logo or insert your own logo, thanks.
      Last edited by skynet85; 10-18-2021, 04:31 AM.

      Comment

      Related Topics

      Collapse

      • Habble7
        I need a BIOS dump for the Samsung S49CG934SU monitor
        by Habble7
        The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.

        Suspected Cause:
        I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.

        Troubleshooting Attempts:
        ...
        05-22-2025, 07:28 AM
      • Mephysis
        DUMP DVR HIKVISION DS-7208HGHI-K1 (80389 Rev 1.3 Firmware)
        by Mephysis
        Hello guys i really need help, i recently updated my DS-7208HGHI-K1 and it somehow got bricked, I've got it up and working now by flashing a new dump file i found but the serial number is really wrong and the uploader of the dump file probably intentionally did it.

        I still have the bricked dump file is it possible to transfer the serial number of the "bricked dump" to the "working dump"?
        03-27-2025, 02:34 AM
      • Verlengsnoer
        Bios splash/logo change
        by Verlengsnoer
        Hi all,

        at firs, i hope this is the right place to post my question.

        Im looking for a tool to change the bios logo.

        everyone knows when you turn on your laptop/pc you will see the manufacturer logo like lenovo, hp, dell...

        i know that HP has a build in option to change the splash logo.

        but i want to change the manufacturer logo to an own logo.

        I try'd Change Logo 5.0, but when i make a backup of an laptop and edit the logo and flash the editted version back on the laptop the logo diddnt change.
        ...
        10-28-2022, 09:52 AM
      • hyperwood
        [REQUEST] 2MB BIOS Dump for Lenovo NM-E471 Rev 2.0 (Winbond 25Q16JWSIQ Chip)
        by hyperwood
        Hi everyone,

        I’m looking for a 2 MB BIOS dump for a Lenovo IdeaPad 5 16ARH7H / Legion 5 with mainboard NM-E471 Rev. 2.0.

        The BIOS chip is a Winbond W25Q16FW (1.8V, 2MB) and it's completely unresponsive / bricked. I tried recovery via USB but no success. Now I want to reflash it externally using a CH341A programmer.

        I already found 32MB dumps (e.g. from Vinafix and Badcaps), but they are too large for the chip – and the last 2MB in those files are just FF FF FF....

        āœ… What I need:
        • A working 2MB BIOS dump
        • Matching NM-E471 Rev. 2.0, e.g. JY575
        ...
        06-25-2025, 02:28 PM
      • Andreas_de
        Power supply Manson NTP-5561 (5661) LCD controller dead - PIC18F87K90 HEX dump required
        by Andreas_de
        Hello!

        i got a damaged Manson NTP-5561 (60V, 1,6A DC output) and and the main issue is that the controler IC for the LCD display has a short. The controler IC PIC18F87K90 is mounted on the back of the back of the LCD. Vss-Vdd = 3 Ohm. The 5V and 3,3V power line was killed as well, but that is not a problem. A new LDO 3,3V and 5V 7805 is already ordered.
        Replacing the PIC18F87K90 is necessary but that makes no sense without having the HEX dump of the new controler.

        Does anybody have such a power supply and could do a HEX dump of the Flash and EEPROM memory?
        ...
        04-12-2025, 10:38 AM
      • Loading...
      • No more items.
      Working...