fdi45 la-j092p rev:1.0 (a00) bios need.
Try our new boardview, bios, & schematic search. Over 1.3 million files for download!
fdi45 la-j092p rev:1.0 (a00)
Collapse
X
-
If you have found our forum useful please consider supporting us. Subscribe for a small monthly fee and receive extra benefits including our boardview / schematic archive.
It only takes 1 minute:
https://www.badcaps.net/settings/subscriptions -
If you have found our forum useful please consider supporting us. Subscribe for a small monthly fee and receive extra benefits including our boardview / schematic archive.
It only takes 1 minute:
https://www.badcaps.net/settings/subscriptionsComment
-
Re: fdi45 la-j092p rev:1.0 (a00)
J092pAttached FilesPremium supporters get full download access and other benefits.
Comment
-
Re: fdi45 la-j092p rev:1.0 (a00)
Need help, Dell ins 5593 blink 3 white 3 organge.
Servicetag: 7JQTN63Attached FilesPremium supporters get full download access and other benefits.
Comment
-
Hello, somebody please could help, the laptop turns on and has video, but it has late display and is extremely slowly in the system, I already tried with another RAM and SSD, thanks.
Motherboard: LA-J092P Rev 1.0 A00
Service Tag: 4N6YC33Attached FilesPremium supporters get full download access and other benefits.
Comment
-
try
Attached FilesPremium supporters get full download access and other benefits.
Comment
-
I found it! Please try this and let me know your feedback.
Attached FilesPremium supporters get full download access and other benefits.
Comment
-
-
Comment
-
Comment
-
Can you fix this Bios?
Laptop turns on but no display
ST-CLDWJZ2Attached FilesPremium supporters get full download access and other benefits.
Comment
Related Topics
Collapse
-
by macabookHello everyone,
I’m currently working on a dead MSI GP75 Leopard (MS-17E71) motherboard (i7 CPU, NVIDIA GPU) with a no display/no backlight issue initially. After extensive investigation, I’m at a critical stage involving EC firmware, BIOS/ME region interaction, and possible deep corruption. I'm seeking advanced insight from anyone with experience in EC/BIOS sync issues or PCH-level behavior. Here’s a full breakdown:
🧩 Initial Issue- Board powers on (fans spin, keyboard lights up and can be adjusted, caps lock led lights), but no display or backlight
- External display (HDMI) shows
-
Channel: BIOS Requests ONLY!
07-24-2025, 02:17 PM -
by cr4zychrissHello everyone,
I am requesting urgent assistance to unbrick my laptop, a rebranded TongFang GK7MRFR chassis. The laptop is completely dead following a faulty in-OS EC flash attempt.
I have successfully used a CH341A programmer and can read/write/verify both flash chips, but using my backups/extractions has failed to restore power. The root cause is likely a corrupted Intel Management Engine (ME) region or an incompatible EC/BIOS pairing. System & Hardware Details- Barebone / Chassis: TongFang GK7MRFR
- MB: MB: GK5MP5X V1.0 Prod :GK5MRFV10T04201310281
- Rebrand: PC Specialist
-
Channel: BIOS Requests ONLY!
-
by TopPopSorry for the long story. I have a Dell Latitude 5530 (i7) laptop (South Peak 15 MLK MB DDR4 203102-1 FK8VG$JA) with an admin BIOS password that I want to remove. Service Tag: HYKFPT3. Other than that the laptop worked OK.
I found a CH341A Black and went looking for the BIOS chip on the motherboard. After trying to read one chip that was a firmware chip but not the BIOS I think I found the BIOS chip labeled Winbond 25Q256JVEN. Altogether I think I found 4 different firmware chips in the laptop. The BIOS chip is a WSON8 6x8. I used the CH341A, NeoProgrammer, and a cheap pogo pin clip... -
by piratiHello everyone,
I recently bought a non-working Asus Zenbook Pro Duo OLED UX8402ZA that was listed for parts only. The seller mentioned that it had no display output but that the charging lights worked.
When the laptop arrived (without a charger and SSD), I connected a charger and confirmed with a multimeter that it was charging the battery. However, when I tried to power it on, only the backlight of the secondary display came on. There was no image, and it didn’t boot into the BIOS.
I decided to try flashing a new BIOS, but since I didn’t want to desolder...-
Channel: BIOS Requests ONLY!
-
-
by DenizBu: https://pcsupport.lenovo.com/tr/tr/p...065tx/mp2br7d9
Hello everyone,
I have a Lenovo IdeaPad Gaming 3 16IAH7. When the device first arrived, there was no display at all.
I had the BIOS cleaned, but the issue was not resolved and there was still no image.
Later, I flashed a different BIOS dump from the same model. With this BIOS, the device boots and display works, but the GPU is not detected in the BIOS (RTX 3060 is missing).
After that, I tried to update the...-
Channel: BIOS Requests ONLY!
-
- Loading...
- No more items.
Comment