Please help me with this bios 6-71-C4100-D03
-
-
Re: help me with this bios 6-71-C4100-D03
Post the full laptop model number and your bios backupOriginally posted by Zeedu -
Re: help me with this bios 6-71-C4100-D03
This is the board zinoxAttached FilesComment
-
-
Re: help me with this bios 6-71-C4100-D03
Please someone should help me with this bios 6-71-C4100-D03 zixon c4100Comment
-
Re: help me with this bios 6-71-C4100-D03
Here https://repo.palkeo.com/clevo-mirror/C4100/
Log into the site with
Username: repo
Password: repoComment
-
Re: help me with this bios 6-71-C4100-D03
Thank you, but I just got manual, if you can help me find the bios file.Comment
-
Comment
-
Re: help me with this bios 6-71-C4100-D03
Here is each bios version. Each one has a 2MB 2,048KB BIN for SPI programming. The other files are included too if you want to use them for bios recovery (wph) and for updating the EC from a bootable DOS flash drive.
System BIOS 1.00.07 and EC firmware 1.00.04 for V3.x M/B only. C41x0704.zip
System BIOS 1.01.13 and EC firmware 1.01.03 for V2.xA M/B only. C41x113103.zip
System BIOS 1.01.15 for V2.xA M/B machine only. BIOS_115.zip
System BIOS 1.01.16 for V2.xA M/B only. BIOS_116.zipComment
-
Re: help me with this bios 6-71-C4100-D03
I look down but I don't understand how they code the bios instead of c4100, they write c410x. I have downloaded it, is not like the bios I use to flash. See the attachment.Last edited by SMDFlea; 08-07-2021, 04:40 PM.Comment
-
Re: help me with this bios 6-71-C4100-D03
I don't know which one is the correct bios for my board, and I don't know how to flash this type of bios file.Comment
-
Re: help me with this bios 6-71-C4100-D03
See post #10 ,posted a few seconds before you did. Every bios on that page is for the C4100 ,forget how they are named for now. The important thing is to check which board version you have,there must be version number on the board somewhere. The V2.xA is for a Version 2. something A board ,for example the x can mean 2.0A ,2.1A .
The same with the V3.x ,it could be V3.0 ,3.1 ,3.2 (they could have made a number of different revisions to the motherboard over the time it was produced.)
.Last edited by SMDFlea; 08-07-2021, 04:56 PM.Comment
-
Re: help me with this bios 6-71-C4100-D03
Thank you very much, how can I flash this type of bios file, because I tried to flash using programmer but I see nor file.Comment
-
Re: help me with this bios 6-71-C4100-D03
What model is your programmer ,and what part number is on the bios chip .EDIT: its a SST25VF016B in the service manual/schematic
In my previous post i metioned the version number, i think its on a small sticker on the ram slotAttached FilesLast edited by SMDFlea; 08-08-2021, 10:54 AM.Comment
-
-
-
Re: help me with this bios 6-71-C4100-D03
Ch341a programmerComment
-
----------------------------------------------------------------------------------------------------------------------------------------------------------
All donations to Badcaps are welcome.
Become a Badcaps supporter
>>>>> click on this link to donate <<<<<
Thanks to all supporters.​
----------------------------------------------------------------------------------------------------------------------------------------------------------Doctrina est fructus dulcis, radicis amarae..Comment
-
Re: help me with this bios 6-71-C4100-D03
Try NeoProgrammer software from this post - https://www.badcaps.net/forum/showpo...50&postcount=5
It supports the chipAttached FilesComment
-
-
Comment
-
Re: help me with this bios 6-71-C4100-D03
Thank you very much!!Comment
-
Hi, I have an MSI PRO B660M-G DDR4 board with damaged BIOS and i need a bios dump from a real board, along with MAC, UUID and Serial Number info (eg. a BIOS screenshot and pictures from the board stickers).
I need to reconstruct the bios on my board, based on another bios image form a real board - meaning a bios image containing MAC address, UUID and Serial number. A stock BIOS is not suffiecient, as it is impossible to discover where the MAC, UUID and SerialNumber are stored. Tried with a similar board, but there are too much differences, and the stock BIOS is missing a lot of...11-17-2023, 10:56 AM -
Hello, first of all, excuse me, I am using the translator, English is not my native language.
I have a Lenovo ideapad 330S - 14IKB laptop.
The tablet did not recognize me when I connected it, so I checked the device manager and I realized that there were many with the exclamation mark, so one by one I began to update their drivers until the sign disappeared of admiration, I even updated the BIOS, and the laptop rebooted normally and worked, so far so good, but the tablet still did not recognize me, I read on the internet that it could be due to a... -
Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.
Upon bringing it home and plugging it up, it showed a standby light.
I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.
The screen seems to blackout and stay black, but with a flashlight I can see the display.
With my Playstation 4 connected via HDMI, and running a game I can hear sound.
Assuming... -
Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic... -
Hello. I am asking you for a hint on how to solve the problem with my touchbook Panasonic CF53-2 standart model. After setting up the BIOS, the laptop displays the wrong image until Windows loads. (More precisely, it displays, but distorted, instead of the Panasonic image immediately after turning it on, it displays what is in photo #1 in the attached file) Then the image appears when Windows starts loading and then there are no problems with the screen until the reboot. If you enter the BIOS, just a black screen. If you connect an external screen, the image on it is the same as on the built-in...
Comment