need working bios for same laptop lenovo ip 3 15IIL05 OR GS454/GS554/GV450/GV550 NM-D031
81WE
PF2FAVP7
TURNS ON BUT NO POST DISPLAYING or any picture
this is ori file
bios for lenovo ip 3 15IIL05 GS454/GS554/GV450/GV550 NM-D031
Collapse
X
-
-
If you can't use a hex editor, use the script in this post to add it .......https://www.badcaps.net/forum/troubl...08#post1605508Leave a comment:
-
yes ideapad 3 15iil05 have sorry but i try insert dmi but not success can u build for me thanksLeave a comment:
-
you have everything you need at post#32.. if the laptop is the ideapad 3 15iil05 model... not ideapad 3 15iil5... I think you are wrong..Leave a comment:
-
hi friend i have ideapad 3 i5 dead i got another i3 board working but no hdd or ssd detect bios already temper before my laptop
modal 81we
ideapad 3 15iil5
nm-d031 rev 1.0
sn- PF1SYN02
MTM-81WE007XIN
please anyone can repair the biosAttached FilesLeave a comment:
-
Attached FilesLeave a comment:
-
Guest repliedHi Everybody,
I had to replace my mainboard from my Lenovo Ideapad 3 with a new one. Everything is connected properly, but unfortunately I have a black screen when starting up. Fans are running and LEDs are on. The screen gets power (i see a very hard to notice change of the color (probably LED backlight turning on) when pressing the ON button.
It feels like there's no BIOS installed or corrupted.
Pressing F2, FN+F2, ESC, F10, etc does not work to go into BIOS. I may need a proper BIOS file to install a new one.
IDeaPad 3 15IIL05
Model: 81WE
SN: PF2DY9XE
MTM: 81WE00LSGE
Factory ID: JVHFC1
MO: PF9XB0720125Leave a comment:
-
RULES UPDATE for BIOS requests/offers AVOID BANNING, READ BEFORE POSTING
https://www.badcaps.net/forum/troubl...before-posting -
i have onboard ram problem i tried post 71 bios it works, display comes after 1 minute still i was using it but windows is updating bios automatically and display goes blank.
please someone guide me what to do.
thank you a lotLeave a comment:
-
good night
I have a problem verifying after saving the modified bios
What problem would it be?1 PhotoLeave a comment:
-
-
-
-
-
-
Attached FilesLeave a comment:
-
I'm sorry. For the wrong request. I am sharing my request again.
IDEAPAD 3 15IIL05
MODEL NAME:81WE
SN:PF2KZ2MY
MTM:81WE00LPTX
The power LED is on but it does not turn on. There is a change in the LCD, the image does not appear
Help is needed.
Thank youLeave a comment:
-
-
hello
The power LED is on but it does not turn on. There is a change in the LCD, the image does not appear
Help is needed.
Thank you advanceAttached FilesLeave a comment:
Related Topics
Collapse
-
by vremHi all,
i have ideapad 3 15iil05 board gs454/gs 554/gv 450/gv 550 nm-d031,
someone can help me to disable onboard ram?
is possible just swap resistor?
here board pic
thank in advance for any help... -
by yaso143gs454/gs554/gv450/gv550 nm-d031
can anyone help ?
first issue short in main power rail fixed by replacing a mosfet
new issue
unit turns on after 5 seconds it turns off (when battery is plugged)
unit turns on then off immediately(when batt is unplugged and using charger only)
main power rails are present 20v , 3.3v is present 5v is present 1.8v is present when unit is turned on 1.8v shows then disappear when unit shuts itself down
also i noticed that cpu is getting hot then turns offdo you have...
-
by kalilinux25LAPTOP: IDEAPAD 3 14IIIL05
MODEL NAME: 81WD
SERIAL NUMBER: PF2K713H
BAORD: GS454/GS554/GV450/GV550 REV 1.0 NM-D031 2019-12-06
PROCESSOR: i3-1005G1
GRAPHICS: NO GFX
ONBOARD RAM
ISSUE: NO DISPLAY
taking 30milliamp
ALW_PWRGD-3.1v on and off state
EC_RSMRST#- 3.0v
PCH_PWROK- 0v onstate and off state 9.9k ohms
PM_SLP_S3#- onstate 0v off state 0v
PCH_DPWROK-3.0v on state and off state
VCCST_PWRGD_R- 0v on/off state
+VCCIN_AUX -0.8v
+VCCIN- 0v
+1.8VALW_P- 1.5v... -
lenovo ideapad 3
laptop board info-
GS454/GS554/GV450/GV550
NM-D031
Rev:1.0
2019-12-06
please can I have a bios.bin to flash as a last hope to revive?-
Channel: BIOS Requests ONLY!
-
-
by Ardent1Hello everyone, I have never flashed a bios before and currently find myself needing to flash a new Winbond W25Q128JVSQ chip without the original bios file.. I have a CH341A programmer and have been able to connect the chip to neo-programmer, but that's about as far as my knowledge takes me so far. When i read the chip the data appeared to be all FF for every entry.
I do not know the history of the motherboard, only that the old chip was removed because it was dead apparently. When the on button is pressed, the laptop on battery alone just shows a solid white light on the side and same on...-
Channel: BIOS Requests ONLY!
-
- Loading...
- No more items.
Leave a comment: