Nm-b452 kbc

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • kesmeseker
    Senior Member
    • Jan 2015
    • 117
    • turkey
    #1

    Nm-b452 kbc

    Hi.i need NM-B452 kbc programing connection number.
    to program with kbc programmer.thanks...
    Tags: None
    • teknik143
      New Member
      • Jul 2020
      • 2
      • turkey
      #2
      Re: Nm-b452 kbc

      nm-b452 KB_pins=32 (JKB1) PD0=20 PD1=16 PD2=14 PD3=9 PD4=13 PD5=17 PD6=10 PD7=12 BUSY=23 STB=15 AFD=26 INIT=19 SLIN=18 KSI4=22 KSI5=21

      by yusuf

        Comment

        Previous template Next

        Related Topics

        Collapse
        • Haitazakaria
          hp 840 g5 led blink after ec programing
          by Haitazakaria
          help please i have hp 840 g5 led blink after ec programing dc power led flashes with no power
          any hints please
          03-25-2023, 06:29 PM
        • battery.12v
          SAS programing ec 256kb issue
          by battery.12v
          hello everyone i have a SAS IO programmer, i want to flash with it ITE-5570-256 version, its detected i can read and write but i cant specify the size to 256kb, it akways tell me its 128kb and when it read and write its just reading and writing 128kb,
          KB_pins=32 FLASH=256 LEFT DOWN 1MM PD0=26 PD1=22 PD2=20 PD3=15 PD4=19 PD5=23 PD6=16 PD7=18 BUSY=29 STB=21 AFD=32 INIT=25 SLIN=24 KSI4=28 KSI5=27



          ================================
          Soft version --> 6.8.6855.234
          Mode selected --> ITE (IT8XXX)
          FTDI driver version 21236
          Version FW JIG M328_EPM240_v34...
          08-26-2022, 07:10 AM
        • Sojke
          Failing to programing V850ES/JG3 with UART
          by Sojke
          Hello , I am having problems sending code that was given to me, in binary format, to this microcomputer via UART0.
          I have connected UART0 directly to my UART USB interface onto header of FTDI232 USB adapter , and the microcomputer responds to some given instructions, like erase, blank check, checksum, read (dumps perfectly valid HEX file that corresponds to given BIN file when converted, exactly the same data in original from chi and spare file), but it wont program. - I have been given an BIN file to work with, but either way an read HEX file wont program either.

          When it fails...
          06-28-2019, 01:53 AM
        • dreico33
          TL866 II Plus Check ID Error on various IC
          by dreico33
          Hellow guys , i really need your help here.

          Lately i have a problem with My TL 866 II Plus programmer, and to be more specific many times on various IC ( Winbond, Gigadevice Mx) i get Check ID Error while i am trying to read the IC. Has already been detected without any kind of problem, but the only to read them is to uncheck every time the "Check ID " option. After that i can read it erase it and re-program it only to get another error at then end saying that can not verify the programing went well so i have program failed. So i am trying to find out what is going on? I...
          11-04-2024, 03:13 PM
        • Inforgalaxie
          Battery not Charge NM-B421
          by Inforgalaxie
          Hello i have this circuit and my battery not charge.
          I was changed PU101, PQ103,PQ101,PQ102, the battery and the problem is the same.

          When the bactery is conected:

          PQ103:
          pin1: 19v
          pin4: 19v
          pin5: 11v

          when the bactery is not conected:

          PQ103:
          pin1: 19v
          pin4: 8v
          pin5: 19v

          Why works the opposite? EC Problem and need programing?...
          11-06-2023, 04:26 AM
        • Loading...
        • No more items.
        Working...