hello everyone i have a SAS IO programmer, i want to flash with it ITE-5570-256 version, its detected i can read and write but i cant specify the size to 256kb, it akways tell me its 128kb and when it read and write its just reading and writing 128kb,
KB_pins=32 FLASH=256 LEFT DOWN 1MM PD0=26 PD1=22 PD2=20 PD3=15 PD4=19 PD5=23 PD6=16 PD7=18 BUSY=29 STB=21 AFD=32 INIT=25 SLIN=24 KSI4=28 KSI5=27
================================
Soft version --> 6.8.6855.234
Mode selected --> ITE (IT8XXX)
FTDI driver version 21236
Version FW JIG M328_EPM240_v34
2F2F7B91632DBDF165C3C665
********* P C B I N F O D A T A **********
PD0=26 PD1=22 PD2=20 PD3=15 PD4=19
PD5=23 PD6=16 PD7=18 BUSY=29 STB=21
AFD=32 INIT=25 SLIN=24 KSI4=28 KSI5=27
[32][L][DOWN][v31]
User select FFC [32]pin [A_type]
Chance FFC from first pin on MB -> GOOD
Chance FFC from end pin on MB -> GOOD
Formula number [2] is chosen
PD0=7 PD1=11 PD2=13 PD3=18 PD4=14
PD5=10 PD6=17 PD7=15 BUSY=4 STB=12
AFD=1 INIT=8 SLIN=9 KSI4=5 KSI5=6
Size embedded FLASH EC 128KB
**********************************************
Settings sent successfully!
Check GND.
Connect the motherboard power adapter.
We are ready for reading or writing.
Save the file: C:\Users\Neo\Desktop\Bios Dump\HP\DAG3JBMB8D0 REV D\ITE_2.bin
26/08/2022 15:51:45
Check connection ...
Received ITE ID -> 5570 rev -> 02
Init ITE ... complete.
Reading, please wait ... complete.
26/08/2022 15:51:50
KB_pins=32 FLASH=256 LEFT DOWN 1MM PD0=26 PD1=22 PD2=20 PD3=15 PD4=19 PD5=23 PD6=16 PD7=18 BUSY=29 STB=21 AFD=32 INIT=25 SLIN=24 KSI4=28 KSI5=27
================================
Soft version --> 6.8.6855.234
Mode selected --> ITE (IT8XXX)
FTDI driver version 21236
Version FW JIG M328_EPM240_v34
2F2F7B91632DBDF165C3C665
********* P C B I N F O D A T A **********
PD0=26 PD1=22 PD2=20 PD3=15 PD4=19
PD5=23 PD6=16 PD7=18 BUSY=29 STB=21
AFD=32 INIT=25 SLIN=24 KSI4=28 KSI5=27
[32][L][DOWN][v31]
User select FFC [32]pin [A_type]
Chance FFC from first pin on MB -> GOOD
Chance FFC from end pin on MB -> GOOD
Formula number [2] is chosen
PD0=7 PD1=11 PD2=13 PD3=18 PD4=14
PD5=10 PD6=17 PD7=15 BUSY=4 STB=12
AFD=1 INIT=8 SLIN=9 KSI4=5 KSI5=6
Size embedded FLASH EC 128KB
**********************************************
Settings sent successfully!
Check GND.
Connect the motherboard power adapter.
We are ready for reading or writing.
Save the file: C:\Users\Neo\Desktop\Bios Dump\HP\DAG3JBMB8D0 REV D\ITE_2.bin
26/08/2022 15:51:45
Check connection ...
Received ITE ID -> 5570 rev -> 02
Init ITE ... complete.
Reading, please wait ... complete.
26/08/2022 15:51:50
