z5wah la-b162p bios+ec chips

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • davodamirajam
    New Member
    • Apr 2017
    • 9
    • iran
    #21
    Re: z5wah la-b162p bios+ec chips

    FIRST THANK YOU ALL
    USE THIS METHOD
    I DO STEP BY STEP AND DO ALL THING
    PIN PLACE IS SAME
    https://www.youtube.com/watch?v=GQGH6yZuXCc

    I USED FOR Z5WAH LA-B162PREV 1(2014 03 11)


    EC FILE AND BIOS IS HERE (FOR THIS MODEL Z5WAH LA-B162PREV 1(2014 03 11)

    IN MY H81 MB PROGRAM WITH CH341 TAKE 20MIN (EC IC IS ENE KB90***)
    https://s6.uupload.ir/files/ok_eccc_vrhe.png

      Comment

      Previous 1 2 template Next

      Related Topics

      Collapse
      • acedogblast
        Guide to transplant MEC1503 EC chip and EEPROM reprogamming for T14s gen 2 and X13 gen 2
        by acedogblast
        This is a guide that I am writing for helping others to replace their MEC1503 EC chip if it breaks (or to get around an inconvenient prompt to the BIOS). This forum has been extremely helpful to me so I would like to contribute to help others. I will tell you right now that this task is very difficult to do. You MUST have experience and tools to do precision micro-soldering, BGA reballing, trace repair, and general laptop repair skills.

        There are some specialty tools needed to do this task. The replacement MEC1503 chips can be acquired from Aliexpress. Do not buy the bare chips as...
        11-02-2024, 05:13 PM
      • DynaxSC
        ASRock B650M PRO RS - BIOS CHIP 25Q256JW BLOCKED BY STATUS REGISTERS
        by DynaxSC
        Hi

        I have a very strange issue with the BIOS SPI chip of an ASRock B650M PRO RS motherboard.
        The SPI chip is an Winbond 25Q256JWEQ model (1V8).
        The motherbaord doas not POST - it lits only CPU and DRAM EZ Debug Leds, and stays that way forever.
        The Flashback function of the motherbaord is also not working, despite all instructions followed correctly - I'm 100% sure of this.

        I have then desoldered the chip, backupped the contents, and tried to earease the chip in order to program stock image, but the chip is locked by status registers SREG2 (TB) and SREG6...
        08-04-2025, 12:20 PM
      • inck243
        Acer e15-e5-576g-5762 bricked. Bios chip won't interface in AsProgrammer.
        by inck243
        Thanks for any help. The board version is DAZAARMB6E0 REV: E. The bios chip is winbond 25Q64JVSIQ1736. W25Q64JV is not available in AsProgrammer -- only BV CV FV or FW_1.8c. The chip won't interface with asProgrammer and a CH341A. When I have this chip on the board, the laptop will not post but when I plug it in to power, the blue LED lights up, also the orange when the battery is connected. When I push the power on button, keyboard backlight turns on and the fan starts briefely then turns off. But I can't do anything to program this bios chip so I bought another one.

        The BIOS...
        07-25-2024, 09:17 AM
      • thxd43
        Lenovo laptop does not turn on, what does this number mean in a BIOS chip?
        by thxd43
        Hello, first of all, excuse me, I am using the translator, English is not my native language.

        I have a Lenovo ideapad 330S - 14IKB laptop.



        The tablet did not recognize me when I connected it, so I checked the device manager and I realized that there were many with the exclamation mark, so one by one I began to update their drivers until the sign disappeared of admiration, I even updated the BIOS, and the laptop rebooted normally and worked, so far so good, but the tablet still did not recognize me, I read on the internet that it could be due to a...
        02-23-2023, 08:37 PM
      • double_DD
        How can I be sure that my EC chip is dead?
        by double_DD
        Hi all,

        As the title suggests, how can I be sure that my EC chip is really dead?

        I've recently gotten into this hobby of laptop repairs, and have successfully brought back to life a couple with some easy fixes, mostly shorted caps.

        Now I'm working on HP Probook 455 G8, that had some "devil" run around on 3V line, burning a bunch of stuff. Luckily I have a dead 455G7 (for spare parts) so I managed to fix it (swapped burned parts) to a point that it will charge (both on barrel jack and usb-c), but it doesn't want to turn on. There is a 3V3 on a keyboard...
        03-12-2025, 07:47 AM
      • Loading...
      • No more items.
      Working...