Lenovo IdeaPad 3 15ADA05

[newarcada_computers@yahoo]

is working thanks

[Nicolas Tizzano]

there is a hole on the side of laptop, pressing on the switch inside that hole you'll be able to enter in bios setup, take from there serial no

Hi Volinakis, thanks for your help.
I already try that, even i explain all in post 194
All serial numbers that i have is from the webpage wich sends me the QR code from laptop label. Pictures attached in post 193

The NOVO button that you means does not work, when I select BIOS option, it does not get in BIOS, just go ahead loading OS, and stuck there.

I will try with another M.2 SSD just to see what's happening...

[volinakis]

So... i could never go to BIOS... thats why i think there is a problem and wanted to test with another BIOS.... I don't know if there is any keyboard combination to Activate something which let me in BIOS.
I don't think that another thing is wrong... even i can't take out RAM couse they are SMD and soldered.

Thanks anyone for your help!! I hope this case could help others!

Namaste!

there is a hole on the side of laptop, pressing on the switch inside that hole you'll be able to enter in bios setup, take from there serial no

[izaak94]

try.. [ATTACH]n3503513[/ATTACH]

Hello, could you help me extract the EC.... I tried with this copy but it didn't work, my equipment came with a wet EC and it was replaced, I don't have the serial number labels.

[Nicolas Tizzano]

Woow QR works and tell me wich computer ir... because there is no label just the ones in attached photo.

This computer is a IdeaPad 3 14ADA05 81W0 PN: PF2PRW41 MTM: 81W000MUAR
With AMD Ryzen 3 3250U and DDR4 4GB

Just for understand, why is important this numbers?? I really like to understand that... thanks for any kind of support!!

PD: my client was so awful taking care this computer... like you see in inside back plate.

Just for refresh my problem...

The computer starts with Blue Screen Error... Client sends me a pic showing the Recovery instance with error code 0xc0000001

When I get it, i looked inside and saw that i was full of dirt. So i cleaned it.
Then I try turning on, and it allway get stuck "Loading Windows" in LENOVO Logo stage.
So i wanted to see BIOS, and pressing F2 or FN+F2, nothing happends, just LENOVO Logo without any loading, gettin stucked.
Looking for internet it says that this notebook comes with NOVO Button... i pushed it, Menú appear, but i have the same problem... BIOS is not working, just the LENOVO Logo. When I try another option, is the same... just goes to LENOVO Logo and get stucked there.

When I take off SSD m.2 the computer says:
"Verifiying shim SBAT data failed: Security Policy Violation
Somthing has gone seriusly wrong: SBAT self-check failed: Security Policy Violation"

So I realise that there is SecureBoot ON.

So... i could never go to BIOS... thats why i think there is a problem and wanted to test with another BIOS.... I don't know if there is any keyboard combination to Activate something which let me in BIOS.
I don't think that another thing is wrong... even i can't take out RAM couse they are SMD and soldered.

Thanks anyone for your help!! I hope this case could help others!

Namaste!

[Nicolas Tizzano]

Look for a label on the laptop case.

Woow QR works and tell me wich computer ir... because there is no label just the ones in attached photo.

This computer is a IdeaPad 3 14ADA05 81W0 PN: PF2PRW41 MTM: 81W000MUAR
With AMD Ryzen 3 3250U and DDR4 4GB

Just for understand, why is important this numbers?? I really like to understand that... thanks for any kind of support!!

PD: my client was so awful taking care this computer... like you see in inside back plate.

[Nicolas Tizzano]

I'm sorry but i didn't follow... Soyo SY-7VBA133U points to another user asking for correct bios, do you reffer to DMI copy ? from what i have been reading DMI doesn't male power led blinking but windows uefi key and other issues right ?

Edit: i think i got the problem, when i write BIOS and next when i read it results are the same. I am using clip and i think i will need 1.8v adapteur am i right ?

If your chip is Winbond 25Q64JW you will need a 1.8v adapter, because W is for 1.8v chip...

I attach datasheet.

You have to see first which voltaje is working... may be chip could works with other voltages but better use the intended for. Even you can test 8 pin for seeing voltage from the board.

Hope could be helpful!

[peste]

click on the link and see post #217..

[borgesbe]

you have everything you need at post #217..
https://www.badcaps.net/forum/troubl...11#post3237947

I'm sorry but i didn't follow...post 217 points to another user asking for correct bios, do you reffer to DMI copy ? from what i have been reading DMI doesn't male power led blinking but windows uefi key and other issues right ?

Edit: i think i got the problem, when i write BIOS and next when i read it results are the same. I am using clip and i think i will need 1.8v adapteur am i right ?

[peste]

Sorry SMDFlean, there it goes:

you have everything you need at post # 217..


https://www.badcaps.net/forum/troubl...11#post3237947

[borgesbe]

Sorry SMDFlean, there it goes:

[SMDFlea]

Hey there, have tried all BIOS on recommended posts, but still Ideapad3 15ADA05 has power blinking light with no image. SN is PF24W3TN, MTM 81W100EDPG, model name 81W1 and i did a bios dump before trying other versions. Can anyone point me in the right direction ?

Please attach your backups directly to your post in a zip or rar.

[borgesbe]

Hey there, have tried all BIOS on recommended posts, but still Ideapad3 15ADA05 has power blinking light with no image. SN is PF24W3TN, MTM 81W100EDPG, model name 81W1 and i did a bios dump before trying other versions. Can anyone point me in the right direction ?

[peste]

I don`t know... there is no sticker anywhere... just a PartNumber inside moba: PN:5B20S44284...
That's all!

Thanks anyway! <3

Look for a label on the laptop case.

[Nicolas Tizzano]

What is your serial number ?

I don`t know... there is no sticker anywhere... just a PartNumber inside moba: PN:5B20S44284...
That's all!

Thanks anyway! <3

[hoaca388]

Hi! Thanks for your help!!

Here is the files... I did not take chip out from board. I used a clip with 1.8v adapter. Looking in the datasheet it says 1.8v that is the W version of 25Q64JW
Made 2 copys.

Tell me if anything was wrong or right and how can i continue.

Again, thanks for all your support!!

What is your serial number ?

[Nicolas Tizzano]

post the backup copy here and we'll see..

Hi! Thanks for your help!!

Here is the files... I did not take chip out from board. I used a clip with 1.8v adapter. Looking in the datasheet it says 1.8v that is the W version of 25Q64JW
Made 2 copys.

Tell me if anything was wrong or right and how can i continue.

Again, thanks for all your support!!

[peste]

Thanks peste for your answer!!

I have one CH341 "pro", same as video... I was thinking to make a BackUp and wanted to compare with others just to see if it could be any difference and try to fix it...
But i don't know if this is possible becouse differents hardware data or any code or key that is especific...

First will do a backup... So, what can i do then?

Could i try BIOS from #29?? but i need to put DMI info?? am i right? (i read all comments that day, i not remember correctly, sorry)...

Huge hug for you!! Thanks for all!!

post the backup copy here and we'll see..

[Nicolas Tizzano]

you need an SPI programmer...here is a video for example..https://www.youtube.com/watch?v=DWWi...nnel=ThisIsHow

Thanks peste for your answer!!

I have one CH341 "pro", same as video... I was thinking to make a BackUp and wanted to compare with others just to see if it could be any difference and try to fix it...
But i don't know if this is possible becouse differents hardware data or any code or key that is especific...

First will do a backup... So, what can i do then?

Could i try BIOS from #29?? but i need to put DMI info?? am i right? (i read all comments that day, i not remember correctly, sorry)...

Huge hug for you!! Thanks for all!!

[peste]

Hello everyone!! I'm from Argentina... i have an Ideapad 3 without any sticker... so i don't know which exact model is my laptop.

I think is IdeaPad 3 15ADA05 (looking for some pictures i notice that is the same...)

MainBoard: GS450 & GS550 & GS750 NM-C821 REV:1.0 2019-12-05
BIOS: Winbond 25Q64JWSIQ

Basically the first time it goes with problem was showing a BlueScreen, and not booting Windows getting stuck in LOGO.
Then it just get stucked reading SSD, showing the "loading icon" but nothing happends.
So i try to enter to the BIOS but nothing... just stuck in LOGO.
Using NOVO button... is the same... not booting BIOS.

So i think this problems comes from BIOS... i don't know if there was any upgrade.

Someone else had the same error?? I wish to try reflashing BIOS, but i don't know so much...

What do you recomend? Thanks in advantage.

you need an SPI programmer...here is a video for example..https://www.youtube.com/watch?v=DWWi...nnel=ThisIsHow