hello everyone, i tried the change my bios ami bios logo with afuwin but my tablet died. I have ch341a pro black one, 1.8v adapter. I find a tested bios 8mb(my backup was 4mb) Desoldered my bios chip (MXIC 25U6435FZNI) and tried the flash but no boot. Desolder and tried again and i realize that after flash when i verify i get an error. What is my mistake?
change my bios ami bios logo with afuwin but my tablet died
Collapse
X
-
Tags: None
-
Re: change my bios ami bios logo with afuwin but my tablet died
Post your original bios backup and tablet model number -
Re: change my bios ami bios logo with afuwin but my tablet died
it's nearly unbranded thing.
Brand is "Vestel V tab 1041" it's windows 10 cherry trail 2 in 1 tablet and notebook. motherboard says TYE1018D Z8350 +3165 +GPS
before logo change afuwin backup
and a dump someone tried and said it's working
Comment
-
Re: change my bios ami bios logo with afuwin but my tablet died
Ok i find my mistake. I use a little bit long cable cut it solder again and i flashed, verify easly. My tablet is not working i need a working dumpComment
Related Topics
Collapse
-
by throwaway327ASUS ROG Ally X - (Handheld Gaming PC)
Model No: RC72LA
Serial No: SBNVKD001014459
Hi all, I've spent the past week digging through the forums and guides to try correct my foolish mistake of changing hidden settings while tinkering around, and to be honest my heads overloaded so I'm hoping you'll be able to help.
I used a tool called 'Smokeless-UMAF' to access usually hidden settings in the bios. I tweaked one or two 'safe' things but made the mistake of tweaking a lot of settings under 'USB/Thunderbolt Configurations' when I didn't know what they did. For...-
Channel: BIOS Requests ONLY!
-
-
by macabookHello everyone,
I’m currently working on a dead MSI GP75 Leopard (MS-17E71) motherboard (i7 CPU, NVIDIA GPU) with a no display/no backlight issue initially. After extensive investigation, I’m at a critical stage involving EC firmware, BIOS/ME region interaction, and possible deep corruption. I'm seeking advanced insight from anyone with experience in EC/BIOS sync issues or PCH-level behavior. Here’s a full breakdown:
🧩 Initial Issue- Board powers on (fans spin, keyboard lights up and can be adjusted, caps lock led lights), but no display or backlight
- External display (HDMI) shows
-
Channel: BIOS Requests ONLY!
07-24-2025, 02:17 PM -
by OMURHELLO I have a reeder brand tablet I want to remove the logo from bios
model : W9iS Pro
serial : 8951412250212...-
Channel: BIOS Requests ONLY!
-
-
by q2v5Lenovo T480s
Model 20L8-S3TE00
Board ET481-U10
Chip MX25L12873F
Hi, I have a few of these & they came with a custom bios boot logo, no passwords etc.
2 x were brand new unused but with custom boot logo, 1 I installed Windows/ran updates then it bricked itself. 1 wouldn't get past the custom bios boot logo.
The third I loaded windows, took a backup of the bios chip, then tried to flash several different clean bios's via programmer which all caused it to not boot. I tried to reflash the original bios both using clip & desoldering but...-
Channel: BIOS Requests ONLY!
-
-
by Vesko356First of all thanks to all of our members who have posted previously all methods posted here.
Please leave a comment if you find something new,or have anything else to add.
-----------------------------------------------------------------------------------------
Find by serial number,model number or series
If you know the laptop serial or model number go to HP support https://support.hp.com/us-en/drivers/laptops .
Enter the serial number or model number and click submit.On the next screen you will have to enter the OS
Operating system and OS version.If...-
Channel: BIOS Requests ONLY!
-
- Loading...
- No more items.
Comment