Re: hp 6050A2728501-MB-A01 bios
it is... post the full name and model and the original bios..
-
Re: hp 6050A2728501-MB-A01 bios
Hello everybody,
i have a HP 850 G3 with bricked Bios
is it possible to flash a new Bios with a programmer?
The Chips are a WINBOND 25Q128FVPQ and 25Q64FVIQ
do you need other Infomation?Leave a comment:
-
Re: hp 6050A2728501-MB-A01 bios
Post your old bios, it is needed to rebuild new one.Leave a comment:
-
Re: hp 6050A2728501-MB-A01 bios
i need bios work
hp elitebook 840 g3Attached FilesLeave a comment:
-
-
Re: hp 6050A2728501-MB-A01 bios
Hello. I have a HP elitebook 850 G3 with AMD discrete graphics. Motherboard is hp 6050A2728501-MB-A01. The issue is no display, fans are spinning. I got a HP 840 G3 uma bin file , its worked well just, no discrete graphics option.
I have the original bin files , can anybody repair it for me?Leave a comment:
-
Re: hp 6050A2728501-MB-A01 bios
Please can you help me, I need BIOS + EC bin file for this model.
HP 840 G3 6050A2728501-MB-A01 .Leave a comment:
-
Re: hp 6050A2728501-MB-A01 bios
thnaks lapfix laptop working fineLeave a comment:
-
Re: hp 6050A2728501-MB-A01 bios
i's another issue , be sure of your screen cable , see if there's any corrusion or something like that ...take measurements from lvds connector and post it here : https://www.badcaps.net/forum/forumdisplay.php?f=23Leave a comment:
-
-
Re: hp bios
what is written on the case, not on the motherboard, and the original bios ..the model on the case..Leave a comment:
-
Re: hp bios
i dont have full name i have juste model for motherboardLeave a comment:
-
The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.
Suspected Cause:
I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.
Troubleshooting Attempts:
... -
Hello engineers 😀,
I’m kindly requesting a clean and unlocked BIOS dump for the following HP laptop, as it’s bricked after flashing SP152727. The system now keeps rebooting, and the original issue was an Administrator / Power-On Password that I can no longer access.😏
🔧 Device Info:
- Model: HP 15-da2007ne
- Product Number: 8XF55EA#ABV
- Serial Number: CND0338P0D
- CPU: Intel Celeron N4000
- EC/BIOS Chip: [Add chip number from the motherboard or BIOS chip]
💀 Problem:😅
- Device shows “Administrator Password”...Today, 04:54 AM -
Hi all,
My Samsung Galaxy Book 2 Pro 15.6-inch laptop has no display and won't boot.
The charging red LED lights up, but the charging screen doesn't show any indication.
When I press the power button, the blue LED cycles on and off three times, then the screen doesn't turn on, and the device won't boot.
(I've tried removing the battery and resetting the device, but the issue persists.)
NoteBook Model name : Samsung NT955XED-KK51G(Galaxy book2 pro, i5-1240p, 15.6inch AMOLED)
PCB model name : Venus2-15-5G(REV1.2), Venus2-15 ADL NPC
S/N : 5RNK9FFT70... -
Hi, I have an MSI PRO B660M-G DDR4 board with damaged BIOS and i need a bios dump from a real board, along with MAC, UUID and Serial Number info (eg. a BIOS screenshot and pictures from the board stickers).
I need to reconstruct the bios on my board, based on another bios image form a real board - meaning a bios image containing MAC address, UUID and Serial number. A stock BIOS is not suffiecient, as it is impossible to discover where the MAC, UUID and SerialNumber are stored. Tried with a similar board, but there are too much differences, and the stock BIOS is missing a lot of...11-17-2023, 10:56 AM -
Hello,
I'm requesting a full BIOS dump (including EC firmware) for an HP OMEN 17-an012nf laptop.
Details:
Model : HP OMEN 17-an012nf
Motherboard Part Number : DAG3BAMBAF0 REV : F
Serial Number (S/N) : 5CD7280D51
BIOS chip : Winbond W25Q64VSIQ
Programmer : EZP2023+
Issue : The motherboard is not powering on. Only the 5V rail is present. The 3.3V rail is missing because EN1 on the SY8286B remains stuck at 0V. This signal is driven directly by the EC/SIO. I replaced the 3.3V regulator and confirmed it's working.
I already...
Leave a comment: