hello guys
i need working dump HP DV6-6160SX corei5
its not turning on - all volts are good
i think its a BIOS Prob
i need working dump HP DV6-6160SX corei5
its not turning on - all volts are good
i think its a BIOS Prob
-
-
Re: i need working dump HP DV6-6160SX corei5
Post your bios backup . -
Re: i need working dump HP DV6-6160SX corei5
these are both main and ecComment
-
Re: i need working dump HP DV6-6160SX corei5
try and give feedbackComment
-
Re: i need working dump HP DV6-6160SX corei5
i need ec its 512kComment
-
Re: i need working dump HP DV6-6160SX corei5
Try this bios + DMI + ECComment
-
Re: i need working dump HP DV6-6160SX corei5
try...Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
Re: i need working dump HP DV6-6160SX corei5
It's still not working and the charger led now turned offComment
-
Re: i need working dump HP DV6-6160SX corei5
try thsi from wrking unit. i dont have EC at the momentComment
-
MSI Alpha 15 B5EEK-237XRU SN:K2209N0193161
Came without initialization. Before that, it was not under repair. With BIOS from the official website, there is a start Ok, after a while the fans gain speed and the laptop turns off.
The cooling system is cleaned, the contact spot is good.
I need a working dump from laptop to check.
This is an original, not working dump....03-10-2024, 07:26 PM -
Laptop is HP Envy x360 13-bf0013dx, hp website link, it's an i7-1250U with 8 gig onboard ram.
Platform: ipa32 la-m024p rev 1b
Originally you'd plug power supply into it and it would take up to 1.2 amps and then drop to 200 milliamps and then go back up again to 1.2, staying all the while at 5 volts. Pressing power button would results in power LED blinking amber 3 times. 3.3 volt rail, 5.1 volt rail present, main power rail 8.8 volts. Power button test pads near EC chip 2.7 volts.
I found a short on the other side:
...10-04-2025, 05:03 PM -
Hi, guys. Maybe, anybody has working dump ene kb9022q d for this laptop (not from update)? Motherboard la-f661p. Don't working keyboard and tauchpad. I want to downgrade bios ec version. Many thanks -
Hello everyone,
i need a working bios for an HP elitedesk 705 g2 base model sff machine, the problem is the machine turns on but there is no display.
SERIAL NUMBER : CZC615CDTY
BOARD MODEL NUMBER : 798073-001 REV 0C
THE BACKUP DUMPS ARE ATTACHED DOWN BELOW.
And this model has three SPI FLASH ICs, two 64mb (U19 and U68) and one 8mb (U11), i need clarification which one is the main bios chip ???!!!...05-19-2024, 04:51 AM -
Apologies if this is the wrong forum, but I'm not looking for a specific BIOS file, I'm trying to understand how one makes a clean BIOS file. So here's the background. I have 2 HP EliteDesk 800 g2 mini 35w pcs. One is working fine; the other doesn't have display out or working USB's nor does it have any flashing error lights. The CPU does get worm enough to cause the fan to spin up, so I think it's posting, but I just don't know. I had it working at one point but trouble started when I tried to put in a drive caddy that had a cooling fan on it. I thought it would be compatible but wasn't...
Comment