hp 840 g6 6050A3022501-MB-A01

[qayyum786]

CAN SOMEONE HELP ME I HAVE HP 840G6 I7 8GEN I NEED TO Clear ME Region FOR THIS LAPTOP I FIND BIOS CHIP AND I DO THE BACKUP 25Q256 32MB
I TRY ALL Intel CSME System Tools v12 AND 14..... Flash Image Tool WITHOUT ANY CHANCE TO EXTRACT DUMP I HAVE THIS ERROR
I tried all the solutions and tried a lot but it didn't work, always the same problem

Clean 32MB file not 16MB

[omaryou]

CAN SOMEONE HELP ME I HAVE HP 840G6 I7 8GEN I NEED TO Clear ME Region FOR THIS LAPTOP I FIND BIOS CHIP AND I DO THE BACKUP 25Q256 32MB
I TRY ALL Intel CSME System Tools v12 AND 14..... Flash Image Tool WITHOUT ANY CHANCE TO EXTRACT DUMP I HAVE THIS ERROR
I tried all the solutions and tried a lot but it didn't work, always the same problem

[SMDFlea]

HP ZBOOK 14U G6
SN: 5CG94263DB
G6 6050A3022501-MB-A01

Off topic,this thread is for the 840 g6

[JersonP]

HP ZBOOK 14U G6
SN: 5CG94263DB
G6 6050A3022501-MB-A01

[SMDFlea]

peste how can use RCUnlocker on the 16MB bios. How can export 16mb bios from my notebook?

You can`t,you will have to use an SPI bios programmer to make a backup.

[darkinthehell]

peste how can use RCUnlocker on the 16MB bios. How can export 16mb bios from my notebook?

[peste]

Can you help me ? I forgot my bios password . I export bios bin with HpFirmwareUpdRec.exe -w command bu I dont know this way is true than I used Rcunlocker but give an error with Wrong chip try reading and unlocking 16mb chip. How can I solve this issue. Please help me?

I shared my computer information in first picture

use RCUnlocker on the 16MB bios

[peste]

merged post

[darkinthehell]

Can you help me ? I forgot my bios password . I export bios bin with HpFirmwareUpdRec.exe -w command bu I dont know this way is true than I used Rcunlocker but give an error with Wrong chip try reading and unlocking 16mb chip. How can I solve this issue. Please help me?

I shared my computer information in first picture

[aymanabodkika]

hello
i need rebar m bios 840 g6 sn-5cg0172jjp
16mb i flash anther He works But with error

[hoaca388]

thank you it work but information invalid mpm
you can extract information

From 16MB chip

[jackx]

HP endpoint Security Controller

thank you it work but information invalid mpm
you can extract information

[hoaca388]

thank you hoaca this work but i have problem with HP endpoint Security Controller
840 g6
id 4WG26AV
my is SN 5CG040L7L

HP endpoint Security Controller

[jackx]

The 16MB file is corrupted

thank you hoaca this work but i have problem with HP endpoint Security Controller
840 g6
id 4WG26AV
my is SN 5CG040L7L

[jackx]

840 g6
id 4WG26AV
SN 5CG040L7L
this is corrupted main and ec by other office

[SMDFlea]

hello
i need bin 1MB for 25q80 lossted
840 g6
id 4WG26AV
SN 5CG040L7L

Have you tried looking through the whole thread, there must be one as its quite common with inexperienced members to post the wrong backup

[jackx]

hello
i need bin 1MB for 25q80 lossted
840 g6
id 4WG26AV
SN 5CG040L7L

[hoaca388]

I was able to get the Notebook workling again with your Files,
but now im getting a HP endpoint Security Controller Problem, could you or someone else Help me to get rid of that?

Serial Number: 5CG936B5D5

The Files that are on the Chips are these:

Here

[rajnbb]

The 16MB file is corrupted

I was able to get the Notebook workling again with your Files,
but now im getting a HP endpoint Security Controller Problem, could you or someone else Help me to get rid of that?

Serial Number: 5CG936B5D5

The Files that are on the Chips are these:

[minhdigital]

can someone build my original file it shows endpoint security error when i hit enter its turn off. 840 g6 s/n=5CG003082G

Send to you, try