Hello everyone!
I need this bios
Dell G7 7588 LA-E994P BIOS
thanks advance
I need this bios
Dell G7 7588 LA-E994P BIOS
thanks advance
-
-
Re: Dell G7 7588 LA-E994P BIOS . needed
hello
here your bios
don't forget to replay after test
password is "211806"
good luckLast edited by SMDFlea; 01-30-2022, 07:07 AM. -
Re: Dell G7 7588 LA-E994P BIOS . needed
Originally posted by dan1200rr
try this dump...There are 10 types of people in the world. Those that understand binary and those that don't.Comment
-
Re: Dell G7 7588 LA-E994P BIOS . needed
do you have backup for this... try to post dumpThere are 10 types of people in the world. Those that understand binary and those that don't.Comment
-
Re: Dell G7 7588 LA-E994P BIOS . needed
Ok both biosComment
-
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Any donations to Badcaps are welcome. Become a Badcaps supporter >>>>> click this link to donate <<<<< Thank you to all the supporters. -- -------------------------------------------------------------------------------------------------------------------------------------------------------------Comment
-
Re: Dell G7 7588 LA-E994P BIOS . needed
i need bios pleaseComment
-
Have this machine with fan running flat out, keyboard lights up, no display. Board looks clean and have CPU and GPU Vcore by the looks. I've dumped the BIOS, service tag is DJL2LP2.
No info from customer if this is an update gone bad or not. Anyone care to look over it, maybe repair it if corrupted. Will try the BIOS recovery in the meantime.Comment
-
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Any donations to Badcaps are welcome. Become a Badcaps supporter >>>>> click this link to donate <<<<< Thank you to all the supporters. -- -------------------------------------------------------------------------------------------------------------------------------------------------------------Comment
-
Ok so while trying to get to the BIOS recovery using CTL+ESC, this thing eventually displayed the Dell logo. BIOS was ancient on V1.0.1 (current is V1.21). As I had this thing in bits, next time I tried it, it was back to the same issue.
So long story short, the CMOS battery was flat, and this machine is somewhat hit and miss of coming out of a CMOS reset (even on current BIOS firmware). One time I got 3 amber + 1 white flash from the front LED. Turned it off by power button, and then it booted up ok. Replaced the battery so that should see this out for another 5 years.Comment
-
Hello,
I recently had new preprogrammed bios (main and ec) soldered by a professional onto my motherboard on my dell g7, which is labeled as la-e994p rev:1.0 (A00). However, upon powering up the PC, the keyboard lights briefly turn on for a moment before switching off, with no display appearing.
I've attached some images displaying the soldered chips and the motherboard. Could you please review them and confirm if everything appears to be in order? Should i ask technician to flash bios again? Does anyone have dump for main and ec bios chips?Comment
-
RULES UPDATE for BIOS requests/offers AVOID BANNING, READ BEFORE POSTING
https://www.badcaps.net/forum/troubl...ore-postingComment
-
LA-E994P REV: 1.0
please help me. no display problem.
Last edited by bryangyll; 12-04-2023, 11:41 PM.Comment
-
Post Serial number,full laptop model number, description of the problem.
RULES UPDATE for BIOS requests/offers AVOID BANNING, READ BEFORE POSTING
https://www.badcaps.net/forum/troubl...before-postingComment
-
G5 5587 LA-E994P no display
Service tag 8PSQXQ2
Help please!Comment
-
Off topic, read the thread title. This thread is for the G7 7588 .Use the forum search engine, look for a related thread ,such as https://www.badcaps.net/forum/troubl...l-g5-5587-biosComment
-
HELLO CAN ANYONE HELP CLEAN DUMP! LA-E994P REV1.0 SERVICE TAG - J820XS2 Dell G5 15 5587 sorry for offtop ,new member and first topicComment
-
Hello, I have an old Dell G3 3579 (ST: 2WQ7LP2-8FC8) with a newer 8FC8 BIOS password. I have successfully attached to the flash chip (W25Q128JVSQ) on the motherboard with a CH341A programmer and made several modifications using Intel FIT (e.g., allow software SPI write) without bricking. I was also able to boot to a modified GRUB shell where I attempted to edit many BIOS security related options like BIOS Guard/Lock, Flash Signature Override, ME FW Image Re-Flash, etc.
Unfortunately, some of these modifications like to Intel BIOS Guard failed because it is fused into the PCH. Also,... -
Hi, I hope some one has some advice for me. I searched the forums but didn't see anything relevant. I acquired two identical Dell 9010 Mid Tower computers from a business office upgrade (they were going to throw them out). Both of them have the same motherboard (00F82W). One of them works flawlessly. The other one had a corrupted BIOS. I tried flashing numerous main BIOS and EC files from the internet, but none of them worked. I decided to copy the main BIOS and EC from the working 9010 computer and successfully flashed the corrupted BIOS. This got the computer able to boot again and run norm...04-23-2025, 04:30 PM -
Working on a Dell 5340 new Intel 13th gen with a corrupt bios flash.
Worked good before failed flash now won't power at all.
May have been a bad connection.
Want to get a clean rebuild bios like new motherboard so can input Service Tag on bootup.
32mb chip - 25Q256JVEN
Attach Dell Bios Update file v1.14 - original Dell update... -
Hi folks,
I got a Dell Optiplex 7010 micro PC (Exact Model) with 8FC8 BIOS and locked out admin password. I attempted to remove the password by patching the BIOS via info from this thread: https://www.badcaps.net/forum/troubl...ssword-patcher
After flashing the patched the BIOS, the PC is unresponsive with a solid AMBER power LED (not documented in manual anywhere)
Steps I took:- Read BIOS with CH341a, verified hash twice
- Patched
-
Hi,
My Dell Precision T7910 died after enabling onboard SAS controller and applying RAID settings. There were no hardware changes between working and not working state, only setup (via bios -> controller settings). After applying settings and reboot PC turns on, flash leds (normally) but there's no further action, it just stays on with no graphics and no keyboard led's on. There's no Dell logo, nothing. I've tried resetting bios by jumper, replacing cpu's, replacing ram, removed/replaced cmos battery, disconnecting all drives etc. I've also dumped .bins from mobo chips SLI1 (16...
Comment