Alienware M14x R2 bios password

[chipside]

Help on Removing Password on Dell Alienware

I Have a Dell alienware M14x r2
I have followed instructions in this forum and already have Password from the dell generator.

Just want to ask how to use these??? Or where to put it to remove setup password on my laptop? Thanks for any help.

[AAAC]

Re: Help on Removing Password on Dell Alienware

The problem with Dell models using 16-hex System Disabled algorithm is if you don't do it right it won't clear the password, upon reboot it will ask for the password again. Some models require you to type the password followed by (CTRL-ENTER) twice instead of just ENTER, if this does not work, then just type the password + ENTER.
So just type the password every time you are asked for a BIOS or SYSTEM password, prevent from getting "incorrect password" more than 2 times, otherwise the System Disabled 16-hex code will change on the third incorrect password and you will need to generate another password for the new code again.

Alienware M14x R2

[suff0beast]

Is this still a thing?

If so, I pulled my Alienware M14x from the closet and trying to set it up for some general randomness

I get the following code on my system when attempting to unlock setup in BIOS:

System Disable:
598CE4F9269E47CD

Service Tag:
3MBYLX1

If anyone is still able to generate an override password that would be great!

Rick

[volinakis]

Is this still a thing?

If so, I pulled my Alienware M14x from the closet and trying to set it up for some general randomness

I get the following code on my system when attempting to unlock setup in BIOS:

System Disable:
598CE4F9269E47CD

Service Tag:
3MBYLX1

If anyone is still able to generate an override password that would be great!

Rick

try: 59445771

[suff0beast]

try: 59445771

That worked! Thank you so much

Rick

[Matt Kelly]

looks like you guys are having good luck could somebody help me alienware 14 E5D397A3C40BA871 SERVICE TAG BB4TVZ1

[volinakis]

looks like you guys are having good luck could somebody help me alienware 14 E5D397A3C40BA871 SERVICE TAG BB4TVZ1

64363414

[Matt Kelly]

W😁w worked like a charm!! Thanks bro your a genius!!!!

[Almorrison]

Please, somebody could help me with my alienware M14X R2? the System Disable is 12B3C17EEA6D34D7 and the Service Tag is 8K6QHV1. Thanks.

[hardware1]

Please, somebody could help me with my alienware M14X R2? the System Disable is 12B3C17EEA6D34D7 and the Service Tag is 8K6QHV1. Thanks.

Try this Password:
70910469

You have to press CTRL+ENTER+ENTER after typing the password instead of ENTER.

[Almorrison]

Try this Password:
70910469

You have to press CTRL+ENTER+ENTER after typing the password instead of ENTER.

OMG! That works, thank you so much, you are the best.

[hardware1]

OMG! That works, thank you so much, you are the best.

You're welcome.

[Rja328]

Hello everybody,

I hope somebody can still help me with my problem, I have acquired an old Alienware m14x R2 that has an Admin password on the bios which I cant access the bios settings because its disabled by the old owner. Please help me if somebody can give me the password

Service tag : 4WPGDS1

Thank you in advanced 😃

[hardware1]

Hello everybody,

I hope somebody can still help me with my problem, I have acquired an old Alienware m14x R2 that has an Admin password on the bios which I cant access the bios settings because its disabled by the old owner. Please help me if somebody can give me the password

Service tag : 4WPGDS1

Thank you in advanced 😃

Try to type wrong password 3 times and post your service tag with the system disable as post #29

[Rja328]

Thank you for the reply, I tried more than three times but it didn’t show any system disabled code.

when I go to Security tab - Locked setup - it says “Unlock Setup? I tried a lot of wrong password and it shows Unlock Setup fail [ Press any key ]

[hardware1]

Thank you for the reply, I tried more than three times but it didn’t show any system disabled code.

when I go to Security tab - Locked setup - it says “Unlock Setup? I tried a lot of wrong password and it shows Unlock Setup fail [ Press any key ]

Type 3 wrong password in "Unlock Setup".

[Rja328]

I tried more than 3 wrong passwords, and it still goes back to unlock set up fail as shown in the pics which is weird

[hoaca388]

I tried more than 3 wrong passwords, and it still goes back to unlock set up fail as shown in the pics which is weird

Post origin bios file.

[Rja328]

Thanks for the response. I dont know where to look for the origin bios file but i have attached the main tab if it helps.

[hoaca388]

Thanks for the response. I dont know where to look for the origin bios file but i have attached the main tab if it helps.

https://www.badcaps.net/forum/troubl...rces-and-tools

https://www.youtube.com/results?sear...+to+use+ch341a