Hello friends. Can you help me with a ux305la rev2.0 working dump? i have a lapotp that doesn't post and i can't find a dump for it. Thank you!
-
-
Re: ux305la rev2.0 bios needed
never mind, i rebuilt it with the asus 6mb release -
Re: ux305la rev2.0 bios needed
hi ux305la rev2.0 bios need emergencyComment
-
Comment
-
Re: ux305la rev2.0 bios needed
ux305la rev2.0, can anyone check my bios?Comment
-
Re: ux305la rev2.0 bios needed
Try flashing this BIOS
https://www.badcaps.net/forum/showpo...2&postcount=48Comment
-
Re: ux305la rev2.0 bios needed
i've tryed, but still no init. by the way, does anyone has schematics or same board, i need measurement of resistor marked yellow. It was soldered to near place, where no resistor on RG picture. It is 100kohm on my boardAttached Filesif you find these attachements useful please consider making a small donation to the site
Comment
-
-
Re: ux305la rev2.0 bios needed
All schematic requests must be placed at "Schematic Requests ONLY!" sub-section:
https://www.badcaps.net/forum/forumdisplay.php?f=41
If you want further help beyond a bios request start a new thread here:
https://www.badcaps.net/forum/forumdisplay.php?f=23
.----------------------------------------------------------------------------------------------------------------------------------------------------------
All donations to Badcaps are welcome.
Become a Badcaps supporter
>>>>> click on this link to donate <<<<<
Thanks to all supporters.
----------------------------------------------------------------------------------------------------------------------------------------------------------Doctrina est fructus dulcis, radicis amarae..Comment
-
Hi, I have an MSI PRO B660M-G DDR4 board with damaged BIOS and i need a bios dump from a real board, along with MAC, UUID and Serial Number info (eg. a BIOS screenshot and pictures from the board stickers).
I need to reconstruct the bios on my board, based on another bios image form a real board - meaning a bios image containing MAC address, UUID and Serial number. A stock BIOS is not suffiecient, as it is impossible to discover where the MAC, UUID and SerialNumber are stored. Tried with a similar board, but there are too much differences, and the stock BIOS is missing a lot of...11-17-2023, 10:56 AM -
Hi everyone,
I'm trying to recover a Fujitsu Lifebook E5513 (most likely 2023 model) that was bricked during a BIOS update. The update was interrupted (probably due to power loss), and now the laptop is stuck in a boot loop showing "PBB rollback" / "SBB rollback" messages.
BIOS access (F2) and Boot Menu (F12) are no longer possible – the system instantly reboots after the rollback messages.
I extracted the official BIOS update package from Fujitsu (contains FJNB2FD.CAP, ~18.7 MB) and tried tools like UEFIExtract, but it seems to only contain... -
I have this laptop that does boot but it's on an older BIOS that has issues with Secure Boot, and I cannot use the normal Razer BIOS updater because for some reason the serial number is missing / got deleted somehow (Common issue on this model, from what I've read). I got a dump of the BIOS chip (or at least what I think is the BIOS chip), and its 16MB in size - the files from the Razer BIOS update are 8MB. (There's two 8MB files, am I supposed to combine these somehow? Or combine with an Intel ME firmware? I have no idea).
So, I'm looking for a BIOS dump for this machine - a 16MB one.... -
Hello,
I badly need bios dump for HP DM1-4000er,
Model: HP DM1-4000er
Motherboard: DA0NM9MB6D0 REV.D
Product: QJ490EA#ACB
Please help. My bios chip burned so I don't have the old bios anymore. I need bios dump before I can install the replacement. -
Dear all,
I have a ASUS ZenBook UX480F with the following symptoms:
I suspect it is a BIOS issue. So I decided to try to clean the ME region. I followed the guide on win-raid, and I believe I have done everything correctly. My problem is: when I open the outimage.bin in ME Analyzer, it says that it is Extracted, and not Region, Extracted as it should be. Is it normal, or did I do something not correctly? This is my first experience editing BIOS files.
I would appreciate if someone could take time to explain the issue, so that I can learn. But I would...
Comment