Thank you in advance for your efforts
-
-
Re: Hi someone have dump for Hisense 32h3e Main .Tp.ms3393.pb851
Plz help
https://***********/threads/devant-3...3-pb851.35301/ -
Re: Hi someone have dump for Hisense 32h3e Main .Tp.ms3393.pb851
Ask in the TV EEPROM forum, this is for laptop bios.
https://www.badcaps.net/forum/showth...=59877&page=24Comment
-
Good morning forum, I'm trying different bios to try to resurrect this machine, with all the bios tried the machine turns on, the fans turn but the screen is black. I tried to download the correct bios from the Asus website (x3500PC by reading the QRCODE from the motherboard) but this is a PFAT AMI, I managed to decrypt it but I get several files and rebuilding it is very laborious, I tried with the uefi tool to extract only the main bios and cut the decrypted one and rebuild it in hex but it doesn't work the same. Wondering if anyone has a dump for this main board. I thank you.
Attach... -
g1 assassin Rev 1 bios dump - main and backup needed
main and backup ic dead so i cant post corrupt bios cause its 01 all over.
thanks
01-23-2024, 03:26 AM -
Hi all
I have a 50r6 with a no power, no standby issue. (First post linked below).
40mins on the phone to Hisense got me nowhere.
After some digging I turned up this post from a bloke with the same power board. I was returning the same voltages. Following advice I passed 3.7v through the standby circuit and the outputs now read a stable 12v and 19.2v on VAMP. Would it be safe to rule out the power supply and focus on the main board? The main board handles the 3.7v feedback.
I have found a 65R6 main board that is identical, though...10-16-2022, 10:04 PM -
Laptop: Lenovo 13s-iml
Board: BM5918_Rev1.3A
EC: Lenovo IT5576E-128
Flash: AH1929 25B127DSIG
I'm looking for a dump of EC and MAIN. Moreover, the EC firmware is the most interesting at the moment. -
I suppose the real question is whether the existing pinouts from ether a 17IPS71 psu are cross compatible with a 17IPS12 psu? If they are then the exchange of the main boards should have no issues providing the screen is compatible with both main boards. Obviously you can change the screen configurations easily enough (providing you have the correct files) for the main board. Why may you ask would I do this? Well a lot of the smart features are no longer working on a Hitachi 48HBT62U main board I wish to give it a new lease of life!
Obviously the same LVDS connector for the screen connection...
Comment