i see alot of paid services on the net but i have a hard time trusting anyone with my macbook. i have forgotten my password... is there anyone that has experience in dumping the bios on this model and can advise me in which tools i would need? thanks
macbook a1466 emc 3178 help figuring out how to dump/flash my bios/efi
Collapse
X
-
Tags: None
-
Re: macbook a1466 emc 3178 help figuring out how to dump/flash my bios/efi
what kind of programmer/flasher do i need? and is the bios encrypted or just binary data?Comment
-
Re: macbook a1466 emc 3178 help figuring out how to dump/flash my bios/efi
would a ch341a and a j6100 adapter for it be good enough to read and write data to bios/efi chip?Comment
-
Re: macbook a1466 emc 3178 help figuring out how to dump/flash my bios/efi
nvm - 10 charsLast edited by james28909; 11-20-2018, 10:32 PM.Comment
-
Comment
-
Re: macbook a1466 emc 3178 help figuring out how to dump/flash my bios/efi
hello again
i have bought ch341a programmer and also have bought the adapter clip to plug right into the service port on the motherboard. i cannot get the ch341a software to recognize the chip and i cannot dump the chip either.
any help would very much be appreciated at this point, i have pretty good soldering skills. i feel like i need to supply power somewhere but i am not sure, and i cannot find alot of documentation on this specific model.Comment
Related Topics
Collapse
-
by Sergio KubCould someone help me?
I have a Macbook Air A1466 EMC 3178 - 2017, board 820-00165 and sometimes the boot interrupts with an image of a folder and a question mark.
Could it be the BIOS? -
by Sergio KubCould someone help me?
I have a Macbook Air A1466 EMC 3178 - 2017, board 820-00165 and sometimes the boot interrupts with an image of a folder and a question mark.
Could it be the BIOS?07-08-2025, 04:12 PM -
Hi everyone.
Macbook Air A1466 EMC 3178 (board 820-00165 A) not turning on and no charging light. Completely dead. With no battery connected it would power up and I could hear the chime, but nothing on the screen and then a sudden turn off. Sometimes during the chime. Opened it up and found some liquid damage. The flat that connects both boards has damage in one side (with a missing pin already). The connectors on the boards are fine, though.
Also, there was liquid damage on the included picture area, which are R8111 and C8111. A quick and soft brush on it made the resistor be gone....04-15-2024, 01:24 PM -
by sherifuHello guys, i have an Macbook Air A1466 Emc 3178, board number 820-00165-A and i encountered following problems. At first no light, no power..after opening and cleaning the LCD socket(Red dot under LCD plug and also Orange dot near wifi card)..got light on charger, fan working and chime...Tried several times and working, then short time after dead...next day work again for short time...after removing the board and cleaning the back(rust on components) with alcohol and soft brush, one of the resistor is gone and no power ..I want to change 5 (buy from China) of them (1 missing and 4 bot looking...1 Photo
-
by AlexVGGood night!
I have
Macbook A1466 2017 EMC 3178 A-820-00165-A
It was bad soldering SPI before (I guess somebody have been trying to fix it before)
I have found problem, it runs, but when I am trying to install OS it is interrupted.
I think error is here:
panic CPU caller 0xffffff0014a8c5c0
Would somebody can help me to find what problem is?
Thank you...12-28-2022, 05:09 PM - Loading...
- No more items.
Comment