HP DMI Tool NBDmiFit

[Levi]

Re: HP DMI Tool NBDmiFit

you're far too kind

[SMDFlea]

Re: HP DMI Tool NBDmiFit

Hi Guys,

I have an issue with my HP elitebook 2470p. Every time I power it on:

Warning Machine is not in committed state

No motherboard has been replaced.
I try to use NBDmiFit tool but I can't fill any serial number (v.2.13).
The BRAND tool can't be used becase the descriptor is locked.
Lateset BIOS already installed.
Windows starts fine.

Please can you help me to fix this issue?

Thanks

Try an older version such as HPBQ138_patched,and try the commit tool, it only works on older hp`s .

[Aleandro]

Re: HP DMI Tool NBDmiFit

Hi Guys,

I have an issue with my HP elitebook 2470p. Every time I power it on:

Warning Machine is not in committed state

No motherboard has been replaced.
I try to use NBDmiFit tool but I can't fill any serial number (v.2.13).
The BRAND tool can't be used becase the descriptor is locked.
Lateset BIOS already installed.
Windows starts fine.

Please can you help me to fix this issue?

Thanks

[xeed]

Re: HP DMI Tool NBDmiFit

Thank you

[temphp]

Re: HP DMI Tool NBDmiFit

I am struggling, but I feel this thread has information I need to put me on the right track. If I need to create a separate post, or post in another thread/area, please just let me know.

I own an HP ENVY 750 that randomly lost its System Board CT Number. Going through the BIOS, I can see the SKU and Serial Number are still intact and I have the CT number recorded on a sticker inside the OEM case.

This is my first go-around with an HP hardware issue of this nature, but I am a systems engineer by trade, so I'm not afraid of poking around.

I have tried making a bootable FreeDOS USB drive and copied over the contents of NbDmiFit versions 2.09, 2.10, and 2.13 (each version was a separate attempt), all resulting in the same error message: "Vendor code not supported in this package"

I see references in this thread to unlocking the MPM, but I'm unfamiliar with that term so I assume I haven't done that. However, I don't think I'm even there yet since the error I'm receiving in the NbDmiFit script indicates I'm missing the necessary HPyyxxxx.exe file (If I understand the process correctly).

I'm not sure why this happened as I wasn't messing with the hardware of this pre-built machine at the time of the error. I haven't updated the BIOS recently, and I haven't done Windows updates this week (and the PC has been rebooted several times since the last updates were applied).

I'm not so much concerned with WHY this happened as getting this fixed. This is the only Windows machine I have at home. I'm hoping someone on here can help me fill in the gap of what I'm missing.

Here's a breakdown.

1. My desktop PC is an HP ENVY 750-437cb running Windows 10 Home (build 1903 or 1909, I don't remember which).
2. As stated, only the System Board CT Number is missing from the BIOS.
3. I have an additional laptop that I'm using to help fix the PC. It's an HP Elitebook running Ubuntu 18.04 LTS. A lot of instructions I've found thus far are for a Windows machine fixing this problem and I've had to adapt those instructions for Linux (e.g. run 'dd' on FreeDOS.img instead of Rufus.exe to create a bootable USB media).
4. In the BIOS, I have disabled Secure Boot and enabled Legacy Boot.
5. I can boot into FreeDOS just fine, but running NbDmiFit.bat produces the error "Vendor code not supported in this package"

Any information/help is appreciated.

[junish]

Re: HP DMI Tool NBDmiFit

Thank you

[rhinopower]

Re: HP DMI Tool NBDmiFit

Wdmifit did it

But I still have message of not committed, what do I need to do now?

[rhinopower]

Re: HP DMI Tool NBDmiFit

Which version do I need for an elitebook 840 g1?

[Nico Latour]

Re: HP DMI Tool NBDmiFit

2,12 too new use older version

[karolluz]

Re: HP DMI Tool NBDmiFit

Hi guys,
ive got hp elitebook 2170p, MPM unlocked but when i use dos tools [hpbq142] [NbDmiFit_2.12 doesnt work] or even windows [wndmifit] and fill missing fields then nothing is saved.

I dont know what to do. When i try to boot in UEFI from EFI file [bootx64.efi] then i have blinkin cursor in left upper corner.

Can someone can help me?

[imranromi]

Re: HP DMI Tool NBDmiFit

hi imranromi can you contact me 03012922006 i am from karachi

Check whatsapp

[aamir123]

Re: HP DMI Tool NBDmiFit

hi imranromi can you contact me 03012922006 i am from karachi

[imranromi]

Re: HP DMI Tool NBDmiFit

i've tried but I have to downgrade Bios and it doen't install it

What means dont install Windows OS?

[gabry120]

Re: HP DMI Tool NBDmiFit

You find this forum my bios 9470m and try i sure work for you

i've tried but I have to downgrade Bios and it doen't install it

[imranromi]

Re: HP DMI Tool NBDmiFit

No one can help me?

You find this forum my bios 9470m and try i sure work for you

[gabry120]

Re: HP DMI Tool NBDmiFit

Hello to Everybody! I have an HP Folio 9470m, i've tried everything but nothing works.
It is like you can read the BIOS but you can't change nothing in it.
I've tried your tool (thank You very much), it says "successfull" but when i reboot nothing change. What can i do? thank you very much for your help!

No one can help me?

[Pebblesworth]

Re: HP DMI Tool NBDmiFit

Hello,

Im new here and i have found this site through searching for an answer. I was wondering if anyone here would happen to have the hp dmi tool 2.15. its for an elite book 840 g4 or if another version would work as well. Thanks in advance for the help

[imranromi]

Re: HP DMI Tool NBDmiFit

Thanks for the reply imranromi, can we PM?

My Pm is block now you send bios in sub forum and send me link i will try to solve problem

[barmania]

Re: HP DMI Tool NBDmiFit

Thanks for the reply imranromi, can we PM?

[SMDFlea]

Re: HP DMI Tool NBDmiFit

1st you need unlock Mpm then work i think.If you have bios file backup send me i fix your problem

All bios backups should be posted in the bios requests sub forum,not in this thread please .