HP DMI Tool NBDmiFit

[feherhollo]

Re: HP DMI Tool NBDmiFit

Read bios chip via programmer.You save file without programmer..

Yes I know but if I read the chip and open wit hex editor, its only zeros, can't see any content. I have multiply programmers and softwares.

Always have difficulties with this 1040 G1 and G2

In my case the problem is Machine not in committed state because I have not set the vPRO functionality and locked the MPM
If I unlock the MPM again I can commit the board and voila. Problem solved.
What can you do with the dump?

https://youtu.be/Q1tMphdzTIo

[imranromi]

Re: HP DMI Tool NBDmiFit

This is current bios. Latest version. Machine not in committed state!!

Featurebyte and Build ID missing. MPM locked
I don't know exactly whats the problem. SKU format is invalid or what??

Read bios chip via programmer.You save file without programmer..

[feherhollo]

Re: HP DMI Tool NBDmiFit

*******

This is current bios. Latest version. Machine not in committed state!!

Featurebyte and Build ID missing. MPM locked
I don't know exactly whats the problem. SKU format is invalid or what??

*********************************************************************
MOD EDIT: Bios requests go in the "Bios Requests ONLY!" section, not in this thread

https://www.badcaps.net/forum/forumdisplay.php?f=40

**********************************************************************

[feherhollo]

Re: HP DMI Tool NBDmiFit

If you done without bios dump tell me i wait..

I can done without dump if I have the correct SMC.bin file. That will unlock the MPM again and I can modify the faulty settings with HP DMI Tool. Lock the MPM again and every boot error will disappear
Just need the generated SMC.bin file for my serial and UUID

[imranromi]

Re: HP DMI Tool NBDmiFit

The problem is I added the SKU in the wrong format and locked the MPM
This caused not in commited mode error.
I don't want to deal with DUMPS, I prefer the original method.
If no any other way I will dump the chips.
This was factory new replacement motherboard from HP

Thanks

If you done without bios dump tell me i wait..

[feherhollo]

Re: HP DMI Tool NBDmiFit

Send error bios file i will fix or remove error.

The problem is I added the SKU in the wrong format and locked the MPM
This caused not in commited mode error.
I don't want to deal with DUMPS, I prefer the original method.
If no any other way I will dump the chips.
This was factory new replacement motherboard from HP

Thanks

[imranromi]

Re: HP DMI Tool NBDmiFit

I have replaced my motherboard and reprogrammed the UUID, serial (except the feature byte and build Id).
The problem is that during boot it says :
"Warning Machine is not in committed state"
When I open the DMI firmware tool it says MPM is not in unlocked mode and the "Commit only" button on the bottom is greyed out.
Where can I find the feature byte and build Id how can I unlock MPM? I read SMC.bin has to be generated based on the UUID and the SN

This is my problem also with factory new 1040 G1 motherboard.

I need to reunlock MPM to correct the fields.

Send error bios file i will fix or remove error.

[feherhollo]

Re: HP DMI Tool NBDmiFit

see post #137 .whats your serial number ?

2ce4210ns1

That post is to lock the MPM
I need to unlock. Tried every method. No success. The MPM locked

[SMDFlea]

Re: HP DMI Tool NBDmiFit

I have replaced my motherboard and reprogrammed the UUID, serial (except the feature byte and build Id).
The problem is that during boot it says :
"Warning Machine is not in committed state"
When I open the DMI firmware tool it says MPM is not in unlocked mode and the "Commit only" button on the bottom is greyed out.
Where can I find the feature byte and build Id how can I unlock MPM? I read SMC.bin has to be generated based on the UUID and the SN

This is my problem also with factory new 1040 G1 motherboard.

I need to reunlock MPM to correct the fields.

See post #137 .Whats your serial number ?

[feherhollo]

Re: HP DMI Tool NBDmiFit

I have replaced my motherboard and reprogrammed the UUID, serial (except the feature byte and build Id).
The problem is that during boot it says :
"Warning Machine is not in committed state"
When I open the DMI firmware tool it says MPM is not in unlocked mode and the "Commit only" button on the bottom is greyed out.
Where can I find the feature byte and build Id how can I unlock MPM? I read SMC.bin has to be generated based on the UUID and the SN

This is my problem also with factory new 1040 G1 motherboard.

I need to reunlock MPM to correct the fields.

[SMDFlea]

Re: HP DMI Tool NBDmiFit

How to dump my biosto file and where to upload¿¿

Here is where bios requests go: https://www.badcaps.net/forum/forumdisplay.php?f=40 .You need to backup your bios using an SPI bios programmer.

[Shay_G]

Re: HP DMI Tool NBDmiFit

upload ur old dump plz

MOD EDIT: NO dumps in this thread, Upload to the bios requests section: https://www.badcaps.net/forum/forumdisplay.php?f=40

How to dump my biosto file and where to upload¿¿

[Aditya11ttt]

Re: HP DMI Tool NBDmiFit

new link https://drive.google.com/file/d/19i5...ew?usp=sharing update

https://drive.google.com/drive/u/0/f...KyclbyYaMa0d7F

try 2.14

[SMDFlea]

Re: HP DMI Tool NBDmiFit

this guide is to LOCK the MPM,
i want to do the opposite,
i want to change the value of my motherboard from LOCK to UNLOCK to change my serial number

Its both,just need to edit the * next to lock or unlock.

[Aditya11ttt]

Re: HP DMI Tool NBDmiFit

my MPM is locked,
how to unlock my MPM¿,

please give me tutorial

upload ur old dump plz

MOD EDIT: NO dumps in this thread, Upload to the bios requests section: https://www.badcaps.net/forum/forumdisplay.php?f=40

[Shay_G]

Re: HP DMI Tool NBDmiFit

https://www.youtube.com/watch?v=9T57ktw8n3Y
https://www.youtube.com/watch?v=r2ubpyeUOB4

Read the pdf manual as well in the first attachment in this thread on page 1:

Manufacture Programming Mode in Unlock mode MPM

this guide is to LOCK the MPM,
i want to do the opposite,
i want to change the value of my motherboard from LOCK to UNLOCK to change my serial number

[SMDFlea]

Re: HP DMI Tool NBDmiFit

my MPM is locked,
how to unlock my MPM¿,

please give me tutorial

https://www.youtube.com/watch?v=9T57ktw8n3Y
https://www.youtube.com/watch?v=r2ubpyeUOB4

Read the pdf manual as well in the first attachment in this thread on page 1:

Manufacture Programming Mode in Unlock mode MPM

[Shay_G]

Re: HP DMI Tool NBDmiFit

https://drive.google.com/drive/u/0/f...KyclbyYaMa0d7F

try 2.14

my MPM is locked,
how to unlock my MPM¿,

please give me tutorial

[Aditya11ttt]

Re: HP DMI Tool NBDmiFit

there is a tool for hp 430 G6 ¿?¿

https://drive.google.com/drive/u/0/f...KyclbyYaMa0d7F

try 2.14

[Shay_G]

Re: HP DMI Tool NBDmiFit

hello

over the years i collected some versions of DMI tools for hp
and i wanted them to be all at one place

take note that some version are not correct (limited information, missing readme etc)
for some laptops you need older, for some newer but there is plenty here
also, you need to use this tool in dos
and there is Manufacturing Program Mode Error solution here since it is related to bios programming

enjoy and remember to share versions you have or related fixes

there is a tool for hp 430 G6 ¿?¿