Hello bois, i need this bios please. Got 3v on ec and main but the laptop doesnt' turns on. Here is old bios, EC and MAIN. PLEASE HElPPPPP 
-
-
Re: Need bios for DA0R63MB6F0 REV F
Your bios extracted from hp official update. If it doesnt work not a bios issue -
Re: Need bios for DA0R63MB6F0 REV F
you need to compare the official bin file and original dump in hex editor and cut out the un-nessary parts to get your bin file. In your case the hp site bin file has ec+main in single bin file and some unnessary bytes.Comment
-
Re: Need bios for DA0R63MB6F0 REV F
%100 working mcplslg123 tnx
Comment
-
Comment
-
Re: Need bios for DA0R63MB6F0 REV F
da0r63mb6f0 rev f can iget clean ECLast edited by mainah njoroge; 08-20-2018, 11:46 AM.Comment
-
Re: Need bios for DA0R63MB6F0 REV F
Just to confirm that dump from mcplslg123 is tested and working,
Worth noting in my case (where adapter sense and +19V were shorted in the adapter lead) that the Super I/O KBC KB3940 was suspected dead as well as F EON 25F16 (definitely dead, couldn't erase) No white LED at charge port laptop dead, 3V3 present at pin 8 of 25L16.
Cheers!Last edited by SMDFlea; 09-06-2021, 05:23 AM.Comment
-
Hello everyone,
I’m currently working on a dead MSI GP75 Leopard (MS-17E71) motherboard (i7 CPU, NVIDIA GPU) with a no display/no backlight issue initially. After extensive investigation, I’m at a critical stage involving EC firmware, BIOS/ME region interaction, and possible deep corruption. I'm seeking advanced insight from anyone with experience in EC/BIOS sync issues or PCH-level behavior. Here’s a full breakdown:
🧩 Initial Issue- Board powers on (fans spin, keyboard lights up and can be adjusted, caps lock led lights), but no display or backlight
- External display (HDMI) shows
07-24-2025, 02:17 PM -
First of all thanks to all of our members who have posted previously all methods posted here.
Please leave a comment if you find something new,or have anything else to add.
-----------------------------------------------------------------------------------------
Find by serial number,model number or series
If you know the laptop serial or model number go to HP support https://support.hp.com/us-en/drivers/laptops .
Enter the serial number or model number and click submit.On the next screen you will have to enter the OS
Operating system and OS version.If... -
Hi, my laptop wont boot at all
With original bios no POST, only LED lights
With alternative BIOS from model TP500LN (flashed via programmer) the notebook works again
Some issues
A- with bios from 500LN, it won't update from bios of model 500LA (from 500LN v203 to 500LA v300)
B- If updated from 500LN version 203 to 300, the battery stops being recognized
Things I tried
1- Update / clear ME: Took the non working bios, made a backup, and did this: https://www.badcaps.net/forum/troubl...theory/trouble... -
Hello, I have an old Dell G3 3579 (ST: 2WQ7LP2-8FC8) with a newer 8FC8 BIOS password. I have successfully attached to the flash chip (W25Q128JVSQ) on the motherboard with a CH341A programmer and made several modifications using Intel FIT (e.g., allow software SPI write) without bricking. I was also able to boot to a modified GRUB shell where I attempted to edit many BIOS security related options like BIOS Guard/Lock, Flash Signature Override, ME FW Image Re-Flash, etc.
Unfortunately, some of these modifications like to Intel BIOS Guard failed because it is fused into the PCH. Also,... -
Hello,
I have a Lenovo Thinkbook 15 G2 ITL i5 Laptop (serial number: MP2BFZEF) that when I turn it on, the led on the power button lights up for 5 seconds, then goes out. There's no display and nothing happens.
So I thought it was a Bios problem.
I found 3 bios chips on the board, which I read with a bios programmer: two XMC model bios chips and a Winbond model bios chip. Each XMC model bios chip has two partitions named XM25QH128A [3.3V] and XT25F128A [3.3V]. And the Winbond model bios chip has three partitions named W25Q80BL 3.3V, W25Q80xV 3.3V and W25Q80DV 3.3V....
Comment