Announcement

Collapse
No announcement yet.

Lenovo Ideapad 310-15ABR bios needed

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #21
    Originally posted by peste View Post

    now you posted the contents of the chip correctly..how did you extract the contents of the bios chip???
    Ive read it with a svod 3. The mb wasnt even turning on

    Comment


      #22
      Originally posted by Chivo77 View Post

      Ive read it with a svod 3. The mb wasnt even turning on
      and now write back to the chip the content from post #22...the board does not have to be turned on..you also need to write the DMI information (you have the range in which they are also found there)

      the bios from post # 22is virgin, use the HxD program (it's free on the internet), enter both bios into the program (your laptop and the virgin one),
      select that interval mentioned in both bios, copy the interval in your bios and pass it to the virgin bios (copy - paste)....and that's it...


      Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:

      >>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<

      Every donation made will go towards server fees and maintenance costs.

      Comment


        #23
        Originally posted by peste View Post

        and now write back to the chip the content from post #22...the board does not have to be turned on..you also need to write the DMI information (you have the range in which they are also found there)

        the bios from post # 22is virgin, use the HxD program (it's free on the internet), enter both bios into the program (your laptop and the virgin one),
        select that interval mentioned in both bios, copy the interval in your bios and pass it to the virgin bios (copy - paste)....and that's it...

        no luck my friend, I used the values you gave me at post #18 but regardless of everything ok (setup shows correct sn and all), fan still does the same. 1st time using hex editor and it was easier than I thought. Thanks for your help.

        Comment

        Working...
        X