Hi everyone can someone fix my original dump always an error of BIOS ACPI ERROR and i cannot install os and external keyboard is not working.I have uploaded the original dump can someone fix this please!
samsung np270e4e BIOS ACPI ERROR
Collapse
X
Related Topics
Collapse
-
by angel35An skylake (H110) Fujitsu PC mothardboard (D3445-K11) somethimes can't start...Appear BSOD ACPI BIOS ERROR in Windows 10
(like below picture)
What can cause somethimes ok, somethimes not good ACPI state? Really strange
If ACPI not good the Bios missing information from SMbus like FAN speed Voltages etc
Wong Bios IC? Power problem?
Wrong status:
Good status somethimes:
...07-27-2024, 04:04 PM -
by peterwangSamsung NP750QGK-KG3US BIOS program error seeking help
PCB:BA41-03025A BA92-25486B
I opened the Modular Flash Image Tool-v16.50.00.1120 software and encountered the following error message. I am seeking help.
...-
Channel: BIOS Requests ONLY!
-
-
by macabookHello everyone,
I’m currently working on a dead MSI GP75 Leopard (MS-17E71) motherboard (i7 CPU, NVIDIA GPU) with a no display/no backlight issue initially. After extensive investigation, I’m at a critical stage involving EC firmware, BIOS/ME region interaction, and possible deep corruption. I'm seeking advanced insight from anyone with experience in EC/BIOS sync issues or PCH-level behavior. Here’s a full breakdown:
🧩 Initial Issue- Board powers on (fans spin, keyboard lights up and can be adjusted, caps lock led lights), but no display or backlight
- External display (HDMI) shows
-
Channel: BIOS Requests ONLY!
07-24-2025, 02:17 PM -
by Habble7The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.
Suspected Cause:
I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.
Troubleshooting Attempts:
...-
Channel: Troubleshooting Computer Displays
-
-
by CityminHi all,
My Samsung Galaxy Book 2 Pro 15.6-inch laptop has no display and won't boot.
The charging red LED lights up, but the charging screen doesn't show any indication.
When I press the power button, the blue LED cycles on and off three times, then the screen doesn't turn on, and the device won't boot.
(I've tried removing the battery and resetting the device, but the issue persists.)
NoteBook Model name : Samsung NT955XED-KK51G(Galaxy book2 pro, i5-1240p, 15.6inch AMOLED)
PCB model name : Venus2-15-5G(REV1.2), Venus2-15 ADL NPC
S/N : 5RNK9FFT70...-
Channel: BIOS Requests ONLY!
-
- Loading...
- No more items.
Comment