Hi everyone can someone fix my original dump always an error of BIOS ACPI ERROR and i cannot install os and external keyboard is not working.I have uploaded the original dump can someone fix this please!
-
-
Re: samsung np270e4e BIOS ACPI ERROR
anyone can fix this dump please -
Re: samsung np270e4e BIOS ACPI ERROR
anyone please helpComment
-
Re: samsung np270e4e BIOS ACPI ERROR
I'm giving you another dump. Try it out first. Post resultComment
-
Re: samsung np270e4e BIOS ACPI ERROR
thank you ill try this and give feedback soonComment
-
Re: samsung np270e4e BIOS ACPI ERROR
Thank you its workingComment
-
An skylake (H110) Fujitsu PC mothardboard (D3445-K11) somethimes can't start...Appear BSOD ACPI BIOS ERROR in Windows 10
(like below picture)
What can cause somethimes ok, somethimes not good ACPI state? Really strange
If ACPI not good the Bios missing information from SMbus like FAN speed Voltages etc
Wong Bios IC? Power problem?
Wrong status:
Good status somethimes:
...07-27-2024, 04:04 PM -
Hello everyone,
I’m currently working on a dead MSI GP75 Leopard (MS-17E71) motherboard (i7 CPU, NVIDIA GPU) with a no display/no backlight issue initially. After extensive investigation, I’m at a critical stage involving EC firmware, BIOS/ME region interaction, and possible deep corruption. I'm seeking advanced insight from anyone with experience in EC/BIOS sync issues or PCH-level behavior. Here’s a full breakdown:
🧩 Initial Issue- Board powers on (fans spin, keyboard lights up and can be adjusted, caps lock led lights), but no display or backlight
- External display (HDMI) shows
Yesterday, 02:17 PM -
The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.
Suspected Cause:
I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.
Troubleshooting Attempts:
... -
1) Error trying to enter the BIOS
--> [F2] won't let me enter the BIOS. To enter the BIOS, I had to create a shortcut and then type C:\Windows\System32\shutdown.exe /r /fw /t 1 in the destination. This forced it to restart and enter the BIOS.
Once inside, I went to the BOOT menu, but, surprise, it wasn't there. I got the following message:
BOOT PRIORITY ORDER (img-05)
1- Windows Boot Manager
2- SATA HDD
3- NETWORK
4- Debian
2) Error trying to access the BOOT MENU
--> I restarted the notebook and pressed [F10] but the BOOT... -
First of all thanks to all of our members who have posted previously all methods posted here.
Please leave a comment if you find something new,or have anything else to add.
-----------------------------------------------------------------------------------------
Find by serial number,model number or series
If you know the laptop serial or model number go to HP support https://support.hp.com/us-en/drivers/laptops .
Enter the serial number or model number and click submit.On the next screen you will have to enter the OS
Operating system and OS version.If...
Comment