Hi everyone can someone fix my original dump always an error of BIOS ACPI ERROR and i cannot install os and external keyboard is not working.I have uploaded the original dump can someone fix this please!
-
-
Re: samsung np270e4e BIOS ACPI ERROR
anyone can fix this dump please -
Re: samsung np270e4e BIOS ACPI ERROR
anyone please helpComment
-
Re: samsung np270e4e BIOS ACPI ERROR
I'm giving you another dump. Try it out first. Post resultComment
-
Re: samsung np270e4e BIOS ACPI ERROR
thank you ill try this and give feedback soonComment
-
Re: samsung np270e4e BIOS ACPI ERROR
Thank you its workingComment
-
An skylake (H110) Fujitsu PC mothardboard (D3445-K11) somethimes can't start...Appear BSOD ACPI BIOS ERROR in Windows 10
(like below picture)
What can cause somethimes ok, somethimes not good ACPI state? Really strange
If ACPI not good the Bios missing information from SMbus like FAN speed Voltages etc
Wong Bios IC? Power problem?
Wrong status:
Good status somethimes:
...07-27-2024, 04:04 PM -
Samsung NP750QGK-KG3US BIOS program error seeking help
PCB:BA41-03025A BA92-25486B
I opened the Modular Flash Image Tool-v16.50.00.1120 software and encountered the following error message. I am seeking help.
... -
Hello everyone,
I’m currently working on a dead MSI GP75 Leopard (MS-17E71) motherboard (i7 CPU, NVIDIA GPU) with a no display/no backlight issue initially. After extensive investigation, I’m at a critical stage involving EC firmware, BIOS/ME region interaction, and possible deep corruption. I'm seeking advanced insight from anyone with experience in EC/BIOS sync issues or PCH-level behavior. Here’s a full breakdown:
🧩 Initial Issue- Board powers on (fans spin, keyboard lights up and can be adjusted, caps lock led lights), but no display or backlight
- External display (HDMI) shows
07-24-2025, 02:17 PM -
The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.
Suspected Cause:
I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.
Troubleshooting Attempts:
... -
Hello everyone,
I am requesting urgent assistance to unbrick my laptop, a rebranded TongFang GK7MRFR chassis. The laptop is completely dead following a faulty in-OS EC flash attempt.
I have successfully used a CH341A programmer and can read/write/verify both flash chips, but using my backups/extractions has failed to restore power. The root cause is likely a corrupted Intel Management Engine (ME) region or an incompatible EC/BIOS pairing. System & Hardware Details- Barebone / Chassis: TongFang GK7MRFR
- MB: MB: GK5MP5X V1.0 Prod :GK5MRFV10T04201310281
- Rebrand: PC Specialist
Comment