Remove_SMM... UEFI.
Collapse
X
-
Re: Remove_SMM... UEFI.
patch done try with right instruction from lenovo auto patcher
[ how to use the patch ]
step 1: Flash and replace current bios with the generated patch file
step 2: Boot the machine
step 3: Press enter/f1/etc. To enter bios settings
step 4: Enter any character when asked for supervisor password
step 5: Press enter when it shows hardware id
step 6: Press space bar 2x when asked
step 7: Turn off machine
step 8: Restore original bios
step 9: Reset bios settings to factory default
i will try this thank youComment
-
Re: Remove_SMM... UEFI.
https://www.badcaps.net/forum/attach...8&d=1542814496
try this above bios first by SMDFlea and check if you get display first
screen came
but i can't pass bios passwordComment
-
-
Comment
-
Re: Remove_SMM... UEFI.
post the dump here (dump with display with password)Comment
-
Re: Remove_SMM... UEFI.
instruction from post #1211Attached FilesComment
-
Re: Remove_SMM... UEFI.
I'm about to go crazy
Everything went very well.
I uploaded the decoded biowater
I typed 1234 in the hardware id part and passed
but the screen does not go any further than thinkpad text
bios i wrote it again it stays there
I do f1 esc, bios information is coming, I press a button
It says "thinkvantage active protection sensor diagonostics start" then goes away, screen stays blackComment
-
Re: Remove_SMM... UEFI.
I'm about to go crazy
Everything went very well.
I uploaded the decoded biowater
I typed 1234 in the hardware id part and passed
but the screen does not go any further than thinkpad text
bios i wrote it again it stays there
I do f1 esc, bios information is coming, I press a button
It says "thinkvantage active protection sensor diagonostics start" then goes away, screen stays blackComment
-
Re: Remove_SMM... UEFI.
PATCH DONE TRY WITH RIGHT INSTRUCTION FROM LENOVO AUTO PATCHER
[ HOW TO USE THE PATCH ]
STEP 1: Flash and replace current BIOS with the generated patch file
STEP 2: Boot the machine
STEP 3: Press ENTER/F1/etc. to enter BIOS settings
STEP 4: Enter any character when asked for Supervisor Password
STEP 5: Press enter when it shows Hardware ID
STEP 6: Press space bar 2x when asked
STEP 7: Turn off machine
STEP 8: Restore original BIOS
STEP 9: Reset BIOS settings to factory defaultComment
Related Topics
Collapse
-
by DynaxSCHi, i have an ASUS PRIME Z590M-PLUS board, which had an shorted Z590 chipset. I have succesfully exchanged the chipset to a factory new one, however there is a serious problem with the Intel Management Engine (later on: ME) not beeing activated after the chipset device replacement.
For lower chipset families (on ASUS boards) it worked to program the oldest bios version into the SPI rom, and the bios had activated the Management Engine itself by default - there was a message on the screen prior booting - "BIOS is updating Management Engine ..... . Do not shut down to prevent... -
by m3vuvIts a bit of a long tale but i swapped the original hd for a 2tb ssd,i want about 6 bootable partitions,it needs the uefi enabling in the bios,I am ok with that,the issue is i cant convert the drive to gpt when it has data on it,the issue is windows wont install to a gpt drive,there is a utility from hp to install the efi partition on the drive but it runs on windows,its a chicken and egg thing,can anyone explaine how hp did this?,I am pulling my hair out;it seems i need to run the hp uefi tool to make the uefi option work in the bios, but it needs windows to run this that wont install on a gpt...
-
Channel: General Computer & Tech Discussion
07-15-2024, 10:15 AM -
-
by CronaxFDHey guys,
Bought myself Surface Pro 4 tablet today on a local craigslist-type website.
I've seen that UEFI was password protected and of course the seller forgot the password, but decided to buy it anyway.
Really needed such a tablet to use with RomRaider to do some logging/tuning on my car.
It has secure boot turned off and boots from USB, so I've formatted SSD and have done clean win10 install.
Works fine, but wanted to ask, are there any real security risks associated with UEFI settings on Surface (remote access etc.)?
From what I've... -
by S70rm7r00p3rHi guys.
I am very new to this business and i have some questions. Maybe someone can help me further.
I have a 2015 Intel NUC NUC6i3SYH and for some internet and office the computer works perfectly. Lately it has been bugging me a bit on and off. Then I saw there is a UEFI update from Intel and I thought if I put it on, the problems might be gone, but unfortunately the update didn't go through. The screen stayed black and after waiting for a while nothing happened, I had to pull the plug at some point. Of course, the NUC then failed to boot!
...-
Channel: BIOS & Schematic Requests!
-
-
by hinsech475Hi, I would appreciate your help with the following problem.
I have a Fujitsu laptop AH562 witn a BIOS-UEFI problem since I converted the HDD to a SSD. For more details on the paltop go to the following link:
http://support.fujitsupc.com/CS/Port...srch=TECHSPECS
After copying the HDD to SSD with ALtiris utility provided with the Kingston SSD and replacing the HDD with the SSD the laptop went into a startup loop with no screen display and only the disk LED flashing twice per second. I waited for approximatly 2h and then stopped the laptop... - Loading...
- No more items.
Comment