Re: HP ProBook 650 G2 6050a2723701-mb-a02
Hi guys this my backup and it's got admin password, anyone can help me please. Thank you
-
-
Re: HP ProBook 650 G2 6050a2723701-mb-a02
https://www.badcaps.net/forum/showthread.php?t=103526hello, me too, i need help for:
laptop / HP PROBOOK 640 G2 /
motherboard / CIRCUS-6050A2723701-MB-A02 /
cpu / INTEL CORE I5 6TH GEN /
serial number / 5CG8291SRW
spi chip original one / MXIC MX25L12873F 16MB@SOIC8
spi chip replace one / GIGADEVICE GD25B127DSIG 16MB@SOIC8
laptop came in with no power issue, when plug in charger only charging led blinking shortly and continuously, pull the mb off the case notice hot air on bios chip zone and melt plastic around and one pad rip of and bios chip 1 leg broken, clean the mess restore the trace pad back the ground one and replace the bios chip, flash it with the .BIN provided by @SMDFlea the N76 one, by the way thank you, https://www.badcaps.net/forum/showpo...00&postcount=7 and it's finaly back to life.
now i need help for check and repair the original backup, a guide to how do it in the right way.
thanks.
Leave a comment:
-
Re: HP ProBook 650 G2 6050a2723701-mb-a02
hello, me too, i need help for:
laptop / HP PROBOOK 640 G2 /
motherboard / CIRCUS-6050A2723701-MB-A02 /
cpu / INTEL CORE I5 6TH GEN /
serial number / 5CG8291SRW
spi chip original one / MXIC MX25L12873F 16MB@SOIC8
spi chip replace one / GIGADEVICE GD25B127DSIG 16MB@SOIC8
laptop came in with no power issue, when plug in charger only charging led blinking shortly and continuously, pull the mb off the case notice hot air on bios chip zone and melt plastic around and one pad rip of and bios chip 1 leg broken, clean the mess restore the trace pad back the ground one and replace the bios chip, flash it with the .BIN provided by @SMDFlea the N76 one, by the way thank you, https://www.badcaps.net/forum/showpo...00&postcount=7 and it's finaly back to life.
now i need help for check and repair the original backup, a guide to how do it in the right way.
thanks.
Last edited by Moh.Jr.Boudali; 02-01-2023, 06:56 AM.Leave a comment:
-
-
-
-
-
Re: HP ProBook 650 G2 6050a2723701-mb-a02
Hello guys, kindly assist with the following , this hp keeps on looping on and off, turns on, display turns on, but can't boot to bios. doesn't reach the desktop. but does boot on HP LOGO turns ON.Leave a comment:
-
Re: HP ProBook 650 G2 6050a2723701-mb-a02
Please Provide tested bin fileLeave a comment:
-
-
-
Re: HP ProBook 650 G2 6050a2723701-mb-a02
hello,
can anyone please check and clean my dump ? ...laptop starts with 3long and 2 short beeps
Leave a comment:
-
-
Re: HP ProBook 650 G2 6050a2723701-mb-a02
Hello
i'm having an issue with this laptop when i turn it on i get a black screen and
the fan after a few seconds ramps up until full speed and stays in this state
please helpLeave a comment:
-
-
Re: HP ProBook 650 G2 6050a2723701-mb-a02
Use the tools mentioned with your original bios backup.
If you use a random bios from somewhere else you can have problems.Did you check the alisaler bios BID to make sure it was the right one,was the ME firmware initialised or configured.If you don`t know how to check any of those things don`t go looking for a random bios.Leave a comment:
-
Leave a comment:
-
Re: HP ProBook 650 G2 6050a2723701-mb-a02
Have you tried RCUnlocker or HP Unlocker ? https://www.badcaps.net/forum/showthread.php?t=103570Leave a comment:
-
Hp Probook 450 G7 s# SCD0348W35 had a locked BIOS. Bought BIOS and EC chips off Ebay that were supposed to match this machine - the 450 G7. Flashed in the BIOS on chip i bought using a CH341. BIOS unlocked next boot. Some error to contact HP. Entered BIOS and reset to system defaults and rebooted. Machine worked fine but every cold boot the contact HP message popped and everything else worked as fine. Assumed the error was from EC chip not matching BIOS that i just flashed in. So i flashed in the EC that was supposed to match from the EBay chip i bought and instant brick.
Ive got...07-08-2025, 09:24 PM -
Hello everyone, I am looking for help as I am struggling to remove lost BIOS Admin password on an HP EliteDesk G6 800 series desktop. I wanted to reset the vPro remote control IP kvm for homelab use.
Here is the hardware identification specs:
HP EliteDesk 800 G6 Desktop Mini PC
Intel(R) Core(TM) i5-10500 CPU @ 3.10GHZ 16384 MB RAM
BIOS ver S21 Ver. 02.05.01 01/05/2021
Born on date: 07/26/2021
SN MXL11841GN
SKU 3X8V9UCHABA
UUID 8116E79EF6FFE94DB0B98A3188270C5C
SYSTEM BOARD ID 8710
SYSTEM BOARD CT NUKBER PJLHQ0A8JF236L... -
Dear All,
Hope that this post is at the right place of the forum.
I am seeking help and technical advice to remove bios admin password from HP ProBook 4520s.
The laptop is operating normally and, I am not facing any major issue with it except; the bios admin password that I found about by coincidence only few weeks back.
As the laptop is operating normally, I am reluctant to take it to a workshop to de-solder the bios chip in order to read it by an external programmer, as I am not an expert in doing such a thing.
After... -
Hello everyone,
I’m currently working on a dead MSI GP75 Leopard (MS-17E71) motherboard (i7 CPU, NVIDIA GPU) with a no display/no backlight issue initially. After extensive investigation, I’m at a critical stage involving EC firmware, BIOS/ME region interaction, and possible deep corruption. I'm seeking advanced insight from anyone with experience in EC/BIOS sync issues or PCH-level behavior. Here’s a full breakdown:
🧩 Initial Issue- Board powers on (fans spin, keyboard lights up and can be adjusted, caps lock led lights), but no display or backlight
- External display (HDMI) shows
07-24-2025, 02:17 PM -
First of all thanks to all of our members who have posted previously all methods posted here.
Please leave a comment if you find something new,or have anything else to add.
-----------------------------------------------------------------------------------------
Find by serial number,model number or series
If you know the laptop serial or model number go to HP support https://support.hp.com/us-en/drivers/laptops .
Enter the serial number or model number and click submit.On the next screen you will have to enter the OS
Operating system and OS version.If...
Leave a comment: