I have damaged dump on HP ProBook 450 G2 (MB: LA-B181P rev:1.0) s/n: CND5400JDV p/n:P5T25ES#BCM.
Thank you for repair.
-
Hello. I have damaged dump on HP ProBook 450 G2 (MB: LA-B181P rev:1.0) s/n: CND5400JDV p/n:P5T25ES#BCM.
Thank you for repair.Leave a comment:
-
RULES UPDATE for BIOS requests/offers *AVOID BANNING, READ BEFORE POSTING*
https://www.badcaps.net/forum/troubl...before-posting
You MUST:- Provide the full machine model number, serial number (or Service tag, SNID) and the board model number (see https://www.badcaps.net/forum/showthread.php?t=88758 )
-
Re: HP Probook 450 G2 440 G2 LA-B181P BIOS + 470 G2
Thanks, its workLeave a comment:
-
Re: HP Probook 450 G2 440 G2 LA-B181P BIOS + 470 G2
"hlp" yourself -> read the rules before posting:
RULES UPDATE for BIOS requests/offers *AVOID BANNING, READ BEFORE POSTING*
https://www.badcaps.net/forum/showthread.php?t=103570
.Requests for password removal or BIOS repair for which the method is available at BIOS guides, methods, resources and tools will not be tolerated anymore if you do not explain why you did not succeed.Leave a comment:
-
-
-
-
need bios hp probook 470 LA-B181P
Hello everyone I need your help my no imageis
and the capslook blinking 3 times and this my dump plz helpLeave a comment:
-
-
Re: HP Probook 450 G2 440 G2 LA-B181P BIOS + 470 G2
hi, can someone help for clean error "Machine is not in commited state" please ?
this is the original bios, hp 440 G2.Leave a comment:
-
Re: HP Probook 450 G2 440 G2 LA-B181P BIOS + 470 G2
Not sure if a 450 g2 LA-B181P (BIOS M74) with clean ME had been posted yet, but if not, try this one. It boots up within a second and works flawlessly
Leave a comment:
-
Re: HP Probook 450 G2 440 G2 LA-B181P BIOS + 470 G2
hi everyone i have probook 470 G2 it says machine not committed state bios info not correct it show probook 440 G2 and the amd gpu not working could it be bios issueLeave a comment:
-
-
-
Hp Probook 450 G7 s# SCD0348W35 had a locked BIOS. Bought BIOS and EC chips off Ebay that were supposed to match this machine - the 450 G7. Flashed in the BIOS on chip i bought using a CH341. BIOS unlocked next boot. Some error to contact HP. Entered BIOS and reset to system defaults and rebooted. Machine worked fine but every cold boot the contact HP message popped and everything else worked as fine. Assumed the error was from EC chip not matching BIOS that i just flashed in. So i flashed in the EC that was supposed to match from the EBay chip i bought and instant brick.
Ive got...07-08-2025, 09:24 PM -
Hello everyone,
I’m currently working on a dead MSI GP75 Leopard (MS-17E71) motherboard (i7 CPU, NVIDIA GPU) with a no display/no backlight issue initially. After extensive investigation, I’m at a critical stage involving EC firmware, BIOS/ME region interaction, and possible deep corruption. I'm seeking advanced insight from anyone with experience in EC/BIOS sync issues or PCH-level behavior. Here’s a full breakdown:
🧩 Initial Issue- Board powers on (fans spin, keyboard lights up and can be adjusted, caps lock led lights), but no display or backlight
- External display (HDMI) shows
07-24-2025, 02:17 PM -
Hello everyone,
I am requesting urgent assistance to unbrick my laptop, a rebranded TongFang GK7MRFR chassis. The laptop is completely dead following a faulty in-OS EC flash attempt.
I have successfully used a CH341A programmer and can read/write/verify both flash chips, but using my backups/extractions has failed to restore power. The root cause is likely a corrupted Intel Management Engine (ME) region or an incompatible EC/BIOS pairing. System & Hardware Details- Barebone / Chassis: TongFang GK7MRFR
- MB: MB: GK5MP5X V1.0 Prod :GK5MRFV10T04201310281
- Rebrand: PC Specialist
-
Hello everyone,
I recently bought a non-working Asus Zenbook Pro Duo OLED UX8402ZA that was listed for parts only. The seller mentioned that it had no display output but that the charging lights worked.
When the laptop arrived (without a charger and SSD), I connected a charger and confirmed with a multimeter that it was charging the battery. However, when I tried to power it on, only the backlight of the secondary display came on. There was no image, and it didn’t boot into the BIOS.
I decided to try flashing a new BIOS, but since I didn’t want to desolder... -
First of all thanks to all of our members who have posted previously all methods posted here.
Please leave a comment if you find something new,or have anything else to add.
-----------------------------------------------------------------------------------------
Find by serial number,model number or series
If you know the laptop serial or model number go to HP support https://support.hp.com/us-en/drivers/laptops .
Enter the serial number or model number and click submit.On the next screen you will have to enter the OS
Operating system and OS version.If...
Leave a comment: