Announcement

Collapse
No announcement yet.

Hp 250 g5

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Hp 250 g5

    Hi everybody,I am in great despair about a laptop HP 250 G5 which wont turn on.When power button is pressed, power led comes out, fan spin for 5-6 seconds and stop,power led also cuts off, only the led for charger in remains on.
    May be its a bad bios, as there is 3 volts on the bios chip.
    Please can some one send me a working bios bin file.Thanks in advance.

    #2
    Re: Hp 250 g5

    M/B Part No???? Is it D702P??

    Comment


      #3
      Re: Hp 250 g5

      Hi, i will check it @ home, its a core i5 with no discreet graphic and 4gb ddr3.

      Comment


        #4
        Re: Hp 250 g5

        M/B part No: bdl50 LA-D703P - REV3.0

        Comment


          #5
          Re: Hp 250 g5

          check all powerswitched rails for short or no woltage

          Comment


            #6
            Re: Hp 250 g5

            1 Recap having not come across any 5 volt on the mb, 19v & 3.3 volt were present.Where should i look for the 5v, as i dont have schematic.
            Attached Files

            Comment


              #7
              Re: Hp 250 g5

              Any schematic for the HP 250 G5? please.
              Here is the bios dump
              Attached Files

              Comment


                #8
                Re: Hp 250 g5

                hello ,
                in attachement you will see 3 files of bios dump original one from HP you can give test and put replay .

                good luck
                Attached Files

                Comment


                  #9
                  Re: Hp 250 g5

                  Thanks, will try and let you know.

                  Comment


                    #10
                    Re: Hp 250 g5

                    Backup & Try. 100% working dump
                    Its easier to help when you give complete info
                    Attached Files

                    Comment


                      #11
                      Re: Hp 250 g5

                      Many thanks mcplslg123, will tryand revert back

                      Comment


                        #12
                        Re: Hp 250 g5

                        No luck with bios flash, now board on & off every 5-6 seconds.

                        Comment


                          #13
                          Re: Hp 250 g5

                          Pq 13 pin 1,2,3,5,6,7,8 grounded, Is this normal

                          Comment


                            #14
                            Re: Hp 250 g5

                            Fault on chip 8A 3G B59, can someome give me the exact reference

                            Comment


                              #15
                              Re: Hp 250 g5

                              Originally posted by dylen View Post
                              Fault on chip 8A 3G B59, can someome give me the exact reference
                              Maybe this one
                              https://cdn.badcaps-static.com/pdfs/...6efd1981b0.pdf

                              https://www.aliexpress.com/item/RICH...3-8a98f9ae4f3d
                              Last edited by meritosari; 05-20-2017, 06:22 PM.

                              Comment


                                #16
                                Re: Hp 250 g5

                                Thanks, will order and try.

                                Comment


                                  #17
                                  Re: Hp 250 g5

                                  Check on charger there you should have 3.3 and 5v output.
                                  If not then possibly need to change charger is

                                  Comment


                                    #18
                                    Re: Hp 250 g5

                                    hp 15-ay032nx la-d703p rev 3.0 bios dump pls hlp...

                                    Comment


                                      #19
                                      Re: Hp 250 g5

                                      3.3 volt rail is shorted in my mb, after injecting voltage, nothing but pch is getting warmer, anyone will tell me that if cpu is really damaged?

                                      Comment


                                        #20
                                        Re: Hp 250 g5

                                        Dump is fine.,,, it worked for me,, Thanks mate

                                        Comment

                                        Working...
                                        X