Any body can help me for macbook air firmware password.
MacBook Air A1465 820-3435-B
Collapse
X
-
Tags: None
-
-
-
Re: a1465 bios password
Hi Techman1025
I have a Question:
With the Macbook EFI/Bios Bin dumps
After reading the efi chip using a (MiniPro TL866) Programmer
Im aware of Editing the bin using any Hex editor and removing the password
but my Question is, Is there a way to (Remove the Serial Number) from the Bin file
From each specific EMC model so they work on everyones macbook so people don't
have to keep individually requesting Dumps ?
I noticed that when I would order a Macbook EFI 8pin chip from China they would
automatically work with "ANY" macbook with the same EMC regardless of the serial # or the same Bin file having to be written back
Only to the same macbook that it was pulled out of.
Here is a Picture I up loaded pinpointing the location I'm referring to
Please let me know If you know from what section in the Bios Bin would need to be erased or how it would be done ?
ThanksLast edited by monkey1; 01-09-2016, 12:37 AM.Comment
-
Re: a1465 bios password
Hi Techman1025
I have a Question:
With the Macbook EFI/Bios Bin dumps
After reading the efi chip using a (MiniPro TL866) Programmer
Im aware of Editing the bin using any Hex editor and removing the password
but my Question is, Is there a way to (Remove the Serial Number) from the Bin file
From each specific EMC model so they work on everyones macbook so people don't
have to keep requesting Dumps ?
I noticed that when I would order a Macbook EFI 8pin chip from China they would
automatically work with "ANY" macbook with the same EMC regardless of the serial #
Here is a Picture I up loaded pinpointing the location I'm referring to
Please let me know If you know from what section in the Bios Bin would need to be erased or how it would be done ?
ThanksMy pc
CPU : AMD PHENOM II x4 @ 3.5Ghz
MB : ASUS M4A89TD PRO USB3
RAM : Kingston ValueRAM 16gb DDR3
PSU : Cooler Master 850W Silent Pro
GPU : ATI Radeon HD 6850Comment
-
Re: a1465 bios password
Hi first the correct way is to keep the original file intacted just remove it using a tool so you original me region stays intacted and all info if you use. a donor dump from another laptop it will have me region problems like fans running full speed random reboots and stut downs and more . the next way is to use a donor and merg the original file where me region is stored with the donor dump and just replace Ssn done then you do a clean install of OS so the cloud want reset password and in my case when using tool pram reset. Hope this help
Techman1025Comment
-
Comment
-
Need Help for A1466 Apple MacBook Air 13" i7 1.7G EMC 2632 MID 2013
I need the original bin file for A1466 Apple MacBook Air 13" i7 1.7G EMC 2632 MID 2013 because when i tryed a bin file(for A1466 Apple MacBook Air 13" i5 1.3G EMC 2632 MID 2013) from my friend and it works but i have a problem with the trackpad and the keyboard they working in boot menu but not working after system start up
Please Help Me thank youComment
-
MacBook Air A1465 820-3435-B
Remove password from this file plzAttached FilesComment
-
Re: MacBook Air A1465 820-3435-B
here is itsAttached FilesComment
-
Related Topics
Collapse
-
by TheUserHello to everyone ,
This is my first post here, and i would like to share with you a small story in case you can help me.
Docker Type-C Gen 2 - Model 40AS. Was given to me by a friend for free ,but with the problem that you cannot use the video output ports.
All ports work , USB , Ethernet, Type C ... but HDMI + Display Port don't work
I searched on reddit and google for problem similar to that, and a LOT of people had fixed this problem by updating the firmware. So i tried , i searched and found 1.1.13 utility and 1.1.20 utility that can help...02-10-2024, 02:07 PM -
by tobeend1. RESET MACOS WITH IPSW
a. Power off MacBook, press and hold the power button to enter Recovery
b. Open Disk Utility, remove Macintosh HD
c. Reboot, connect to the network to Activate Mac.
d. Plug the C cord in the first port of the MacBook into the other Mac, then power off the MacBook
d. Hold down the Control (L) + Option (L) + Shift (R) + Power key combination for 10 seconds
e. Release the other keys, but keep holding the Power key for another 10 seconds
f. MacBook is returned to DFU, open Apple Configurator 2 on the other Mac, right-click... -
by gurj1979Hi guys.
I've got a Ubiquiti US-8-150W POE switch which has issues with updating the firmware.
Turned out to be a bad EEPROM chip. It would read the firmware and work as normal, but failed to write new firmware to it.
So I took off the chip and read on EEPROM and saved it. Wrote to old chip and failed to write
Got New chip and writes good.
THE PROBLEM...
It fails to fully load the firmware, POE lights fail to work during g firmware test during load. I'm suspecting bad EEPROM Read.
Does anyone have a Good Firmware I can have?...-
Channel: Troubleshooting & Designing Networks
-
-
by brcontaHello,
I have a macbook Early 2015 A1502 EMC 2835 820-4924-A.
Whenever I try to update the system the device dies after reboot. It only comes back to life if the battery is disconnected, and then connected again (energy drain). Apparently the firmware update fails.
I can install High Sierra normally, but I can't install a newer one.
I can use a disk with a newer system that was installed on another machine.
I've already tested another chip and another bios file, but no effect.
Boot ROM: MBP121.0177.B00
SMC: 2.28f7
I've tried the procedure... -
by marce002Hello
I have a macbook 11" A1465 820-3208A from 2015
laptop has no evidence of water damage, it is clean, ... laptop is working perfect on USB with linux live... but of course it shows a blinking folder ...no ssd is detected, no ios.....
I have it received with a wrong SSD inserted!!! in the slot, so maybe fried something... the owner placed a SSD from a1466 model instead the correct one.
I have tested a working SSD on this system and does not work either.
I have measured:
C4504 = provides 3.3V
SSD_RESET_L = 3.33v
... - Loading...
- No more items.
Comment