Announcement

Collapse
No announcement yet.

100% working MacBook Pro (13-inch, Late 2016, 4 TBT3) BIOS dump

Collapse
X
Collapse
 
  • Page of 3
  • Filter
  • Time
  • Show
Clear All
new posts
Previous 1 2 3 template Next
    #21
    Re: 100% working MacBook Pro (13-inch, Late 2016, 4 TBT3) BIOS dump

    Originally posted by peste View Post
    try..
    Thanks dear its very very good
    Last edited by leonardevinchi; 01-21-2021, 04:46 PM.

    Comment

      #22
      Re: 100% working MacBook Pro (13-inch, Late 2016, 4 TBT3) BIOS dump

      Hello peste, could you help me out with this one?
      It is maybe a corrupt BIOS.

      Kind Regards
      Attached Files

      Comment

        #23
        Re: 100% working MacBook Pro (13-inch, Late 2016, 4 TBT3) BIOS dump

        Originally posted by Harryrepair View Post
        Hello peste, could you help me out with this one?
        It is maybe a corrupt BIOS.

        Kind Regards
        post the full name and model of the laptop, S / N, motherboard model.
        Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:

        >>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<

        Every donation made will go towards server fees and maintenance costs.

        Comment

          #24
          Re: 100% working MacBook Pro (13-inch, Late 2016, 4 TBT3) BIOS dump

          A1706 820-00239-a EMC 3071 C02ST3AEGYFH

          Kind Regards

          I use the MX25L6473E BIOS Chip
          Last edited by Harryrepair; 06-26-2021, 03:27 AM.

          Comment

            #25
            Re: 100% working MacBook Pro (13-inch, Late 2016, 4 TBT3) BIOS dump

            Can i use Winbond instead?

            Depending on which BIOS i use, i get 0.19a , 0.65a = both not booting device
            I used one BIOS version which let me boot the device with 0.85a but this "disabled" message.
            Last edited by Harryrepair; 06-26-2021, 03:32 AM.

            Comment

              #26
              Re: 100% working MacBook Pro (13-inch, Late 2016, 4 TBT3) BIOS dump

              Originally posted by Harryrepair View Post
              Can i use Winbond instead?

              Depending on which BIOS i use, i get 0.19a , 0.65a = both not booting device
              I used one BIOS version which let me boot the device with 0.85a but this "disabled" message.
              you can use any one of them

              Micron N25Q064
              Macronix MX25L64
              Atmel AT25DF321
              Winbond W25Q64

              Comment

                #27
                Re: 100% working MacBook Pro (13-inch, Late 2016, 4 TBT3) BIOS dump

                thx gayyum786

                Comment

                  #28
                  Re: 100% working MacBook Pro (13-inch, Late 2016, 4 TBT3) BIOS dump

                  thank you guys i made it by myself.
                  I am installing High Sierra through Online Recovery.
                  Lets see if everything will work properly.

                  Comment

                    #29
                    Re: 100% working MacBook Pro (13-inch, Late 2016, 4 TBT3) BIOS dump

                    Originally posted by Harryrepair View Post
                    thank you guys i made it by myself.
                    I am installing High Sierra through Online Recovery.
                    Lets see if everything will work properly.
                    try..
                    Attached Files
                    Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:

                    >>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<

                    Every donation made will go towards server fees and maintenance costs.

                    Comment

                      #30
                      Re: 100% working MacBook Pro (13-inch, Late 2016, 4 TBT3) BIOS dump

                      Hello
                      i need help with Locked A1706 EFI 2017

                      thanks
                      Attached Files

                      Comment

                        #31
                        Re: 100% working MacBook Pro (13-inch, Late 2016, 4 TBT3) BIOS dump

                        Originally posted by alirag View Post
                        Hello
                        i need help with Locked A1706 EFI 2017

                        thanks
                        try..
                        Attached Files
                        Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:

                        >>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<

                        Every donation made will go towards server fees and maintenance costs.

                        Comment

                          #32
                          Re: 100% working MacBook Pro (13-inch, Late 2016, 4 TBT3) BIOS dump

                          Hello everyone!

                          Got a weird one here.
                          A1706 4 TBT3 EMC 3071
                          serial C02SRB43GTFJ

                          Would boot 1 time out of 10 lets say.
                          Most of the times trackpad click is on, but no image.
                          When I got to login screen, sometimes it hangs.
                          Diagnostic gave no issues, when I was able to run it.
                          It always goes to 20V. when I get no image, fans never spin and cpu cooler gets quite hot.

                          Could this be a BIOS issue? Board is clean, no liquid ,no previous soldering whatsoever.

                          I post here the original BIOS, can someone help me with a clean ME?
                          Thanks in advance!
                          Attached Files

                          Comment

                            #33
                            Re: 100% working MacBook Pro (13-inch, Late 2016, 4 TBT3) BIOS dump

                            Originally posted by magneh View Post
                            Hello everyone!

                            Got a weird one here.
                            A1706 4 TBT3 EMC 3071
                            serial C02SRB43GTFJ

                            Would boot 1 time out of 10 lets say.
                            Most of the times trackpad click is on, but no image.
                            When I got to login screen, sometimes it hangs.
                            Diagnostic gave no issues, when I was able to run it.
                            It always goes to 20V. when I get no image, fans never spin and cpu cooler gets quite hot.

                            Could this be a BIOS issue? Board is clean, no liquid ,no previous soldering whatsoever.

                            I post here the original BIOS, can someone help me with a clean ME?
                            Thanks in advance!
                            Could someone help me out with this one?

                            Comment

                              #34
                              Re: 100% working MacBook Pro (13-inch, Late 2016, 4 TBT3) BIOS dump

                              Hello Peste,

                              Was wondering if you can help me with this one.

                              a1706 emc 3071, 820-00239-a, sn: C02TL7U0GTFJ

                              I dumped bios.fin file, cleaned password, flashed cleaned file to chip but now it will not boot. It does turn on and charges according to my amp meter. It gets warm and fans turn on but no display. I think my dump is bad/ corrupt.

                              Here is my original dump... Thanks!
                              Attached Files

                              Comment

                                #35
                                Re: 100% working MacBook Pro (13-inch, Late 2016, 4 TBT3) BIOS dump

                                Originally posted by igrepairs818 View Post
                                Hello Peste,

                                Was wondering if you can help me with this one.

                                a1706 emc 3071, 820-00239-a, sn: C02TL7U0GTFJ

                                I dumped bios.fin file, cleaned password, flashed cleaned file to chip but now it will not boot. It does turn on and charges according to my amp meter. It gets warm and fans turn on but no display. I think my dump is bad/ corrupt.

                                Here is my original dump... Thanks!
                                try..
                                Attached Files
                                Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:

                                >>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<

                                Every donation made will go towards server fees and maintenance costs.

                                Comment

                                  #36
                                  Re: 100% working MacBook Pro (13-inch, Late 2016, 4 TBT3) BIOS dump

                                  Originally posted by peste View Post
                                  try..
                                  Hi Peste,

                                  Thanks for your help! Unfortunately its still not working. It turns on, gets warm, fans turn on but never get image on the display. I tried flashing on two different chips just in case but same result. Not sure where to go from here. Any suggestions would be greatly appreciated! Thanks.

                                  Comment

                                    #37
                                    Re: 100% working MacBook Pro (13-inch, Late 2016, 4 TBT3) BIOS dump

                                    mac os bigsur and monterey in not completed

                                    thank you sir
                                    Attached Files

                                    Comment

                                      #38
                                      Re: 100% working MacBook Pro (13-inch, Late 2016, 4 TBT3) BIOS dump

                                      Please need to unlock apple for a1706 820-00239-A
                                      Attached Files
                                      Last edited by vitahasergienko; 08-03-2022, 01:47 PM.

                                      Comment

                                        #39
                                        Re: 100% working MacBook Pro (13-inch, Late 2016, 4 TBT3) BIOS dump

                                        Try this
                                        Attached Files

                                        Comment

                                          #40
                                          Re: 100% working MacBook Pro (13-inch, Late 2016, 4 TBT3) BIOS dump

                                          Thanks for your help

                                          Comment

                                          Previous 1 2 3 template Next
                                          Working...
                                          X