hp 15-1033wm bios needed
no display
no display
-
g1 assassin Rev 1 bios dump - main and backup needed
main and backup ic dead so i cant post corrupt bios cause its 01 all over.
thanks
01-23-2024, 03:26 AM -
Hi, I have an MSI PRO B660M-G DDR4 board with damaged BIOS and i need a bios dump from a real board, along with MAC, UUID and Serial Number info (eg. a BIOS screenshot and pictures from the board stickers).
I need to reconstruct the bios on my board, based on another bios image form a real board - meaning a bios image containing MAC address, UUID and Serial number. A stock BIOS is not suffiecient, as it is impossible to discover where the MAC, UUID and SerialNumber are stored. Tried with a similar board, but there are too much differences, and the stock BIOS is missing a lot of...11-17-2023, 10:56 AM -
Hello there,
I have a SF314-41 motherboard that i bought impulsively recently, the problem is that i only bought the motherboard only, nothing else. When i tried powering on the board with 19V (soldered on the DC IN port), and then shorting the pin 1-2 of the keyboard, the board is turning on (as indicated by the fan), however it seems like the board is displaying on the internal display as connecting to a display on the HDMI (external) does not display anything.
I tried connecting a USB keyboard, the keyboard is powered on, however pressing numlock do nothing (supposed to toggle... -
Common SPI bios chip programming Questions and Answers
----------------------------------------------------------
Q: I have a bios request,i can`t post my backup as i can`t read from the chip.
A: If you can`t read from it how do you expect to write to it ?.
Q: Why is my bios chip unreadable ?.
A: The programmer is faulty or has a worn or broken zif socket.
The USB cable is frayed,connector pins worn or some other physical damage.
Not enough amperage or voltage to power the programmer properly.
Bad...09-02-2021, 04:40 PM -
Hi Guys,
Looking for some help with an HP Elite Dragonfly.
The customer explained it was updating the BIOS, the flashing completed, but afterwards the laptop wouldn’t power back on.- The laptop has no power but does take the correct voltage.
- It shows 5 flashes white/amber, which indicates a BIOS issue.
- I backed up the original BIOS to extract the feature byte etc.
- I then flashed the BIOS with a clean version from HP’s website, but the laptop still gives 5 white/amber flashes.
Just wanted to pick your brains on this — has anyone come across this before or...
Comment