need bios dump for this model mobo num is EG70BZ Rev 2.1
-
-
Re: packard bell EG70BZ
any one -
Re: packard bell EG70BZ
the model plsComment
-
Re: packard bell EG70BZ
Here the working bios dump
Comment
-
Re: packard bell EG70BZ
need with UEFI pls. v2.xxComment
-
Re: packard bell EG70BZ
Thank You medinfo!Comment
-
Re: packard bell EG70BZ
try the dumpComment
-
Re: packard bell EG70BZ
Great!!! Thank you so much Maha2005!!!!!Comment
-
Re: packard bell EG70BZ
Thanks bro you are the bestComment
-
Re: packard bell EG70BZ
thank youComment
-
Re: packard bell EG70BZ
Thanks working perfectComment
-
Re: packard bell EG70BZ
thank youComment
-
Hello !
I need helpComment
-
My best regards to all.
I have a Packard Bell EG70BZ that doesn't display, it's an AMD, I reprogrammed the bios with the maha2005 file but it still doesn't work.
The old bios file is attached.
Please help me find a solution!Comment
-
If you have found our forum useful please consider supporting us. Subscribe for a small monthly fee and receive extra benefits including our boardview / schematic archive.
It only takes 1 minute:
https://www.badcaps.net/settings/subscriptionsComment
-
Good evening everyone, the customer left with his computer like this. Seeing that the solution was not found. He had to buy another computer. That's why I didn't say anything else.Comment
-
Looking for a BIOS for Packard Bell KAV60 compatible with Windows 7.
-
Hello everyone,
I am requesting a clean BIOS dump for the following device:
Brand: Packard Bell
Model: CARRERA-F3
Serial Number: BL.9UEEP.322
Current BIOS Version:
AP8139_ENE_V0.13.1_M00P1 T3G0
Issue:
The current BIOS does not detect NVMe SSD. The drive is installed and confirmed working, but it is not visible in BIOS or during boot.
What I have tried:
- Verified NVMe SSD is functional on another machine
- Reset BIOS to default settings
- Checked BIOS settings for storage configuration (no... -
I recently took a dump of the 4GB EMMC dump of a new and working Panasonic main board and now the TV won't turn on.
The dump was successful and the program finished without errors.
I used a XGecu T48 to do the dump.
I actually had a few issues getting it to go and I might write up something as a bit of a guide as I couldn't find much in English to go from.
One thing I did do was connect a 1kohm resistor from the 1.2v line to the RSTN pin as per the instructions, could this have caused issues?
I also shorted out the crystal of the adjoining ECU together and at one... -
This specification for the HP ProBook 640 G1 Base Model Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the 640 G1 Base Model boardview and 640 G1 Base Model schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet,...09-06-2024, 05:27 AM
-
This specification for the HP ZBook 14 G2 Base Model Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the 14 G2 Base Model boardview and 14 G2 Base Model schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or...09-06-2024, 05:27 AM
Comment