Hello! I need help with my BIOS. Black screen... I think the dump is corrupted.
FX707VV-HX122
SN:S7NRKD04226130G
CN:7NS0
MFD:2024-07
FX707VV-HX122
SN:S7NRKD04226130G
CN:7NS0
MFD:2024-07
-
-
Scan the QR code on the motherboard and post what it says. If you can`t scan it post a picture instead. -
Yes it is what was needed. Your backup has corrupt ME firmware and no DMI. I found a FX507VV bios and copied the ME region to your backup, edited in a new FX707VV bios region ,copied the DMI from the FX507VV and edited it with your serial number and other info from the QR code. I didn`t manage to clean the ME firmware but you can try the bios as-is to see if it will boot or not.Comment
-
Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!
My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.
This time the original cable broke too close to the screen, it can't be fixed without tearing the screen... -
Just had a customer bring in a M2 MBA A2681 that had had a screen replacement in April at another repairer. Since then, she has been getting intermittent kernel panics. It's an aftermarket screen, and of course it fails in diagnostics as the calibration hasn't been done. The error in the panic log is "No device added after powering on the rails".
It seems the original repairer has swapped the board and the screen to other MAC's, and said that it isn't a screen issue. From what I understand, by doing a quick search on Google, this is in fact a screen issue. The panic relates...07-31-2025, 08:37 PM -
Hi,
I have a iphone XS that came in for a screen replacement, the screen was badly cracked, and inside missing scues, on the back of the screen still the blue protector, the screen was a LCD. So we replaced the screen and all good, installed the screen and we noticed that pressing the screen with a bit of force but not excessive, the phone dies. After plugging the charger it turns back on, but again if you press it it dies. I open the phone again, and I can't see anything major, with the phone open, if I press on the logic board, battery, charging board, or even putting pressure on... -
hello everyone ,
i have a Precision 7670 with corrupted bios dump 3 amber 6 light (Flash corruption detected by SBIOS) I need a clean bios dump or repair my bios dump
thanks for your help !... -
Hello everyone, I’ve just been given a Samsung UE55JU6800K smart tv as it had white spots on the screen due to the led lenses falling off. After refitting them & putting the tv back together I thought it was a nice easy fix for a free bedroom tv , then I tried it before screwing the back into place. I realised that the right side of the screen was darker than the other side, I removed the screen again as I thought the backlights had failed but they are fine.
I put the screen back in place & turned it back on . The screen seemed to be ok again but different screens on the same...
Comment