Can some one help me to remove the bios password
SN#5CD3312GNF
ProdID 7A6S4EC#ABD
HP EliteBook 655 G9
SN#5CD3312GNF
ProdID 7A6S4EC#ABD
HP EliteBook 655 G9
-
-
you have everything you need here:
https://www.badcaps.net/forum/troubl...96#post3683596
-
Hello, I have an old Dell G3 3579 (ST: 2WQ7LP2-8FC8) with a newer 8FC8 BIOS password. I have successfully attached to the flash chip (W25Q128JVSQ) on the motherboard with a CH341A programmer and made several modifications using Intel FIT (e.g., allow software SPI write) without bricking. I was also able to boot to a modified GRUB shell where I attempted to edit many BIOS security related options like BIOS Guard/Lock, Flash Signature Override, ME FW Image Re-Flash, etc.
Unfortunately, some of these modifications like to Intel BIOS Guard failed because it is fused into the PCH. Also,... -
Hello everyone,
I’m currently working on a dead MSI GP75 Leopard (MS-17E71) motherboard (i7 CPU, NVIDIA GPU) with a no display/no backlight issue initially. After extensive investigation, I’m at a critical stage involving EC firmware, BIOS/ME region interaction, and possible deep corruption. I'm seeking advanced insight from anyone with experience in EC/BIOS sync issues or PCH-level behavior. Here’s a full breakdown:
🧩 Initial Issue- Board powers on (fans spin, keyboard lights up and can be adjusted, caps lock led lights), but no display or backlight
- External display (HDMI) shows
07-24-2025, 02:17 PM -
Hello everyone,
I am requesting urgent assistance to unbrick my laptop, a rebranded TongFang GK7MRFR chassis. The laptop is completely dead following a faulty in-OS EC flash attempt.
I have successfully used a CH341A programmer and can read/write/verify both flash chips, but using my backups/extractions has failed to restore power. The root cause is likely a corrupted Intel Management Engine (ME) region or an incompatible EC/BIOS pairing. System & Hardware Details- Barebone / Chassis: TongFang GK7MRFR
- MB: MB: GK5MP5X V1.0 Prod :GK5MRFV10T04201310281
- Rebrand: PC Specialist
-
Hi Guys,
Looking for some help with an HP Elite Dragonfly.
The customer explained it was updating the BIOS, the flashing completed, but afterwards the laptop wouldn’t power back on.- The laptop has no power but does take the correct voltage.
- It shows 5 flashes white/amber, which indicates a BIOS issue.
- I backed up the original BIOS to extract the feature byte etc.
- I then flashed the BIOS with a clean version from HP’s website, but the laptop still gives 5 white/amber flashes.
Just wanted to pick your brains on this — has anyone come across this before or... -
Hello Need bios unlock for hp Elite x360 830 G10 2-in-1 SN:5CG33350LJ thank's in advanced...
Comment