Casper c510 mother board code 08N1-18Y4Y00 Rev 2.2 KBC required Can someone please share?
-
-
Type the laptop serial number, full name and model, motherboard model, etc.
post the contents of the bios and EC chip even if it is corrupted..
read the forum rules..https://www.badcaps.net/forum/troubl...before-posting
-
Casper c510.7200-8L45T
SN: sr001664406
anakart:08N1-18Y4Y00 REV.2.2
İT8587e bana Rom lazım cihazın İT8587 arızalı
English ! I need ROM for IT8587e, my device's IT8587 is faulty.Comment
-
Comment
-
here's the biosComment
-
Here`s the EC extracted from your bios.Comment
-
Thank you very much my friend, I will write about my experience.Comment
-
hello.
DANLAIMBAC0 casper excalibur g770 bios password, help thank you
PC KASA MODELİ..................: CASPER EXCALIBURG770
ANAKART MODELİ . DANLAIMBAC0 REV:C
CPU-işlemci ..................:SRH8Q (Intel Core i7-10750H)
GPU- Grafik Kartı .......: N18P-G62-A1 4X VRAM
GPU2-kuzey/güney ...:SRJAU FH82HM470
BIOS ve EC Entegre...: 25Q128JVSQ
SİSTEM Entegre .....:IT8987E BXS
RAM ve VRAM ad .. .......: DDR4-3200... -
Hi,
I need to replace the LEDs of this TV. The screen is glued with double sided tape. This video shows the proceudre required.
I need a source for this type of double sided tape adhesive please.
https://www.youtube.com/watch?v=bN6g...nel=QUADRA-NET
Tks! -
Hi All,
Need a bit of assistance digging up some information on current technology support required for modern motherboards to post? By modern let's say 6th gen skylake to current intel and all of the Ryzen series. You would think this would be on the ARK product page, but nope. Besides saying dedicated graphics required it doesn't really tell you squat.
Reason I ask is I've ran into this a few times now (first on 6th gen SkyLake and now on 12th gen AlderLake) where if I use an intel F SKU CPU multiple different boards refuse to post with multiple different graphics... -
HikVision DS-7104HQHI-K1 Motherboard: DS-80303_P REV 2.0 and SN: C47579229 Firmware dump or unlock required. Thank you!...06-11-2025, 01:54 PM -
Hi all,
First time trying to fix a TV for a friend, it's a Bush DLED32165HD.
Power Board - 17IPS11
Mainboard - 17MBS82S
Panel - VES315WNDB-02
Red blinking standby light is on steady, press power button on remote and light flashes 7 times then stays steady, press power on remote again light flashes 10 times and then goes off.
Checked all the voltages on the power board inc backlight circuit, they all read ok and are stable. Backlights tested with backlight tester and all work fine (2 strips x11LED on each).
No picture, backlight or sound just blinking...
Comment