I need the ITE EC SPI programmer Tool to program the EC of my Asus K72JR.Can someone help me?
-
-
-
I will access the EC via the keyboard connector
Comment
-
Search the forum for NeoProgrammer softwareComment
-
To programm the EC? You know this is not possible ! i need the ITE SPI programmer tool ! i have neoprogrammer and asprogrammer and over programms. you know with this programms you can only read and write the bios chip, not the EC...Comment
-
Comment
-
Yes, on an external chip. It's an ITE IT8570E. That's why i need the software to describe it. I have to extract the firmware from the Bios file and then flash it separately on the EC. And for that i need the programmer tool...Comment
-
ECComment
-
Ok, now i have a 1024 KB file. But what should i do with it ?Comment
-
My friend, i dont know what you mean by U3003!? Ok, i'll start from the beginning: I'm buying an old Asus laptop. Mainboard name K72JR Rev 2.0 and it was dead. I found and flashed a suitable bios file with the Ch341a programmer and the laptop started again. But the fan turns on after 10 seconds and goes on full speed. and szays at 100%. So the Bios on the SPI chip ( it is an SST 25VF032B ) is ok. The embedded controller has a problem, so the firmware on it! And that's my problem...I want to repair the EC firmware and this is explicitly only possible with the ITC EC SPI Programmer Tool. So i need this tool...Comment
-
The board with IT8570E dont have U3003?Comment
-
Comment
-
The IT8570E is not programmable...Comment
-
Comment
-
Comment
-
Hello, I have an issue with the motherboard. Specifically, it doesn't power on, more precisely, the POST initialization doesn't occur.
Let me start from the beginning, the motherboard suddenly stopped working one day. There are no beep signals from the speaker, and the debug LEDs are not lighting up. After inspecting it under a microscope and using thermal imaging, I didn't find anything that could be damaged.
After that, I began voltage measurements, in which I noticed the absence of VDDQ, VDDP, VTT, and VPP lines. Later, I checked if there is an EN state on these lines,... -
Hi techies!
Please help me to find and grab Asus ga503qs 404 or 409 versions. I will be very pleased. And I'm all ready to give something valuable for exchange!
Please help me out!
these links are already dead:
https://dlcdnets.asus.com/pub/ASUS/G...IOS_Update.exe
https://dlcdnets.asus.com/pub/ASUS/G...503QSAS409.zip
https://dlcdnets.asus.com/pub/ASUS/G...IOS_Update.exe
https://dlcdnets.asus.com/pub/ASUS/G...503QSAS404.zip -
Hello guys. What programmer can I use to program the EC IT8886HE? I have the TL-866II PLUS but it is not in the library, nor is any of the ITE family.
-
I have asus k72jr with i5 amd hd graphics
The problem with this laptop after asus logo shows nothing happen black screen led on fan turn on no post
Ii have reprogrammed bios changed cpu ram the same problem I can't even enter bios
Does anyone have ideas or someone have boardview
I'm looking to remove vcore coils for amd graphics
Just to make sure other things are OK
Thank you for accepting ☺10-09-2023, 01:29 AM -
Hello, so I have this asus h81m-k desktop motherboard with a very low resistance on the 3v line (8 ohm). And found out that the SIO was the one getting hot. My question is that do I need to program this (like in laptops) before replace or just do it?. Actually I've never seen this specific repair on desktop motherboards.
The SIO is a NCT5535D-A
Thanks!...07-31-2024, 04:35 PM
Comment