How to transfer serial number and DMI data from bad HP BIOS to good one?

[xxxchudyxxx]

Hi,

i have a corrupted BIOS file from a laptop, but i need to recover the serial number and DMI info (like product name, UUID, etc.). I also have a good BIOS dump from the same model.
Is there a simple way to copy the DMI data from the bad file to the good one?
HP 650 G3

Thanks!

[volinakis]

Hi,

i have a corrupted BIOS file from a laptop, but i need to recover the serial number and DMI info (like product name, UUID, etc.). I also have a good BIOS dump from the same model.
Is there a simple way to copy the DMI data from the bad file to the good one?
HP 650 G3

Thanks!

use Bios Configuration Utility (BCU). install it and use it under cmd as Admin. use cmd line "biosconfigutility /get:1.txt" (or whatever you want to name it). Open 1.txt with text editor and change serial, sku buildid, fearure byte, CT and mac adress with one from old bios. You can find serial, sku buildid, fearure byte going to "partsurfer.hp.com" and type serial from old bios (5CG7372HL5)
Serial Number : 5CG7372HL5
Product Number : Z2W51EA
Description : HP ProBook 650 G3
BuildID: 16WWCLCT601#SABD#DABD
Feature Byte: 3Q3X476J6S6Z6b7H7M7Q7W7m7saBaEapaqauawbhdQdUdpdqfXgd.eT

CT and Mac Adress you'll find on a label from faulty motherboard. CT is PGDQK00WB911KK

Modify 1.txt with these values, save it as "2.txt" in Documents folder then move it to BCU folder (it won't let you to save in BCU folder). Then use cmd line "biosconfigutility /set:2.txt". You can do this with BCU if you don't have password on bios.

[xxxchudyxxx]

I tried do that, but I have MPM locked