I need dump for GMXAGXX_12L_V1, i think it' a clevo motherboard or other oem vendor, the Notebook is PC SPECIALIST
-
-
Read https://www.badcaps.net/forum/troubl...before-posting ,post the full laptop model number and serial number
-
Good time of day to all,
I have a laptop - PC Specialist PC50DS - that I am attempting to repair.
(Also manufactured and (was) sold under names of Clevo PC50DS and Schenker XMG 15 Pro)
Laptop is:- Not powering on
- Not taking charge.
Before I proceed, I would like to add some context: I am by no means experienced in laptop board repair. I have one repair under my belt, for which I had access to Boardview schematics (.brd), which helped me greatly by being able to see HOW and WHAT WITH each component interacts and "Follow the circuit"....03-16-2025, 03:56 PM -
Hi all,
This is my first post here (I am very new to forums!) and I hope someone can help. I am looking for a full dump of the BIOS of a HP Proliant Microserver Gen 8 so that I can get this mini server running again. (BIOS version J06 2019-04-04, chip 25Q064A). I think my board was partially bricked after a failed BIOS update.
I got it second hand in this state and all the normal attempts at bios restoration have not worked. I have even desoldered the chip and tried to load the actual BIOS from HP, but it is missing some parts needed to boot the system.
I... -
Hi i need working dump for clevo w670szq1 . Bios + ME . THX -
This specification for the MEDION ERAZER Specialist P10 Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Specialist P10 boardview and Specialist P10 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or...09-07-2024, 06:11 AM
-
The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.
Suspected Cause:
I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.
Troubleshooting Attempts:
...
Comment