Need Dump for GMXAGXX

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Simpletek
    Member
    • Mar 2011
    • 35
    • Italy

    #1

    Need Dump for GMXAGXX

    I need dump for GMXAGXX_12L_V1, i think it' a clevo motherboard or other oem vendor, the Notebook is PC SPECIALIST
  • SMDFlea
    Super Moderator
    • Jan 2018
    • 20633
    • UK

    #2
    Originally posted by Simpletek
    I need dump for GMXAGXX_12L_V1, i think it' a clevo motherboard or other oem vendor, the Notebook is PC SPECIALIST
    Read https://www.badcaps.net/forum/troubl...before-posting ,post the full laptop model number and serial number

    All donations to badcaps are welcome, click on this link to donate. Thanks to all supporters

    Comment

    • Simpletek
      Member
      • Mar 2011
      • 35
      • Italy

      #3
      Originally posted by SMDFlea

      Read https://www.badcaps.net/forum/troubl...before-posting ,post the full laptop model number and serial number

      sorry smdflea
      it's an assembled notebook, there's little or nothing written, however I'll correct the post.

      Comment

      • Simpletek
        Member
        • Mar 2011
        • 35
        • Italy

        #4
        Originally posted by Simpletek
        I need dump for GMXAGXX_12L_V1, i think it' a clevo motherboard or other oem vendor, the Notebook is PC SPECIALIST
        Vendor : PC SPECIALIST
        MANUFACTURER: TONGFANG HONGKONG
        MODEL No: GM5IDY

        Comment

        Related Topics

        Collapse

        • agoncarenko
          PC Specialist / Clevo PC50DS - No Power
          by agoncarenko
          Good time of day to all,

          I have a laptop - PC Specialist PC50DS - that I am attempting to repair.
          (Also manufactured and (was) sold under names of Clevo PC50DS and Schenker XMG 15 Pro)

          Laptop is:
          • Not powering on
          • Not taking charge.


          Before I proceed, I would like to add some context: I am by no means experienced in laptop board repair. I have one repair under my belt, for which I had access to Boardview schematics (.brd), which helped me greatly by being able to see HOW and WHAT WITH each component interacts and "Follow the circuit"....
          03-16-2025, 03:56 PM
        • smok92
          clevo w670szq1 Bios Dump
          by smok92
          Hi i need working dump for clevo w670szq1 . Bios + ME . THX
          01-27-2023, 03:44 AM
        • Document Archive
          MEDION ERAZER Specialist P10 Notebook Specification for Upgrade or Repair
          by Document Archive
          This specification for the MEDION ERAZER Specialist P10 Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Specialist P10 boardview and Specialist P10 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or...
          09-07-2024, 06:11 AM
        • Habble7
          I need a BIOS dump for the Samsung S49CG934SU monitor
          by Habble7
          The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.

          Suspected Cause:
          I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.

          Troubleshooting Attempts:
          ...
          05-22-2025, 07:28 AM
        • Mephysis
          DUMP DVR HIKVISION DS-7208HGHI-K1 (80389 Rev 1.3 Firmware)
          by Mephysis
          Hello guys i really need help, i recently updated my DS-7208HGHI-K1 and it somehow got bricked, I've got it up and working now by flashing a new dump file i found but the serial number is really wrong and the uploader of the dump file probably intentionally did it.

          I still have the bricked dump file is it possible to transfer the serial number of the "bricked dump" to the "working dump"?
          03-27-2025, 02:34 AM
        • Loading...
        • No more items.
        Working...