Announcement

Collapse
No announcement yet.

How to switch graphic from external to internal in BIOS

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    How to switch graphic from external to internal in BIOS

    Hello. Have one asus F3ka with bad external graphic ATI 2600hd and internal in chipset.
    Enybody know how to modify BIOS or modify board to set the internal graphic to boot at it?
    Tags: None
    #2
    Re: How to switch graphic from external to internal in BIOS

    Bios will usually have both. It usually involves a hardware mod, moving a few SMD resistors. Check the schematics and compare between discrete and integrated.
    Originally posted by PeteS in CA
    Remember that by the time consequences of a short-sighted decision are experienced, the idiot who made the bad decision may have already been promoted or moved on to a better job at another company.
    A working TV? How boring!

    Comment

      #3
      Re: How to switch graphic from external to internal in BIOS

      when my gpu fault it show "lines" so i in bios change "first gpu device" and notebook boot with x1300 gpu without issues. so i think bios change is required.on board i mod some transistors to get voltage for igp but still blank screen

      Comment

        #4
        Re: How to switch graphic from external to internal in BIOS

        no bios modders here?

        Comment

        Previous template Next
        Working...
        X