hello guys can you pls help me to remove password
S/N PF-0S7LQU
thanks guys
S/N PF-0S7LQU
thanks guys
-
-
----------------------------------------------------------------------------------------------------------------------------------------------------------------------
https://www.badcaps.net/donate/
----------------------------------------------------------------------------------------------------------------------------------------------------------------------Comment
-
-
Hello
Lenovo ThinkPad X1 Carbon5
Type 20HQ-S1740l
MB-DX120 NM-B141
EC (MEC) Bois Issu,IC Number MEC1653-BA1, i am not able to find pinouts to program EC ,
I have SVOD3 programmer, no pinouts fine in SOVD Database
i found some pinpointes beside MEC Ic , but i dont know how to connect
Laptop not turning on ,voltage is good VCC5M/VCC3M,power switch also getting voltage
i am attaching photos of motherboard & MEC Ic
how to program MEC With SVOD3
can anyone help me plsAttached FilesComment
-
-
please help me remove pass bios asus a1505 13th gen... -
Problem
This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached.... -
Hi, i need bios DELL OPTIPLEX 5480 ALL-IN-ONE, or if anyone can unlock my password please.
I couldn't find a generic password... -
Hello, pls i need remove bios pass from bios dump.
Asus UX 310UV...03-09-2021, 02:17 AM -
every time I open the tool, I have the screen that appears
and I am always in a hurry to use it so I click and it automatically sends me a link to the manufacturer.
It annoys me lol.
2 solutions to remove it.
Either you remove pic.bmp and it no longer appears so no more links when clicking.
or else you can modify the exe to remove the .bmp
hope this helps users...01-15-2025, 03:24 PM
Comment