HP 15CS1001np

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • bravo
    Member
    • May 2011
    • 10
    #1

    HP 15CS1001np

    Hello. I have this HP 15-CS1001NP that is taking 30 seconds to show image after power on

    Bios dump attached

    If anyone could clear the ME region for me, i would be grateful

    HP 15-CS1001NP
    Board: DA0G7EMBAE0 rev:E
    SN: 5CD84312V7
    Attached Files

    if you find these attachements useful please consider making a small donation to the site

    Tags: None
    • kalilinux25
      Badcaps Legend
      • Mar 2018
      • 2093
      • ZAMBOANGA SIBUGAY
      #2
      Originally posted by bravo
      Hello. I have this HP 15-CS1001NP that is taking 30 seconds to show image after power on

      Bios dump attached

      If anyone could clear the ME region for me, i would be grateful

      HP 15-CS1001NP
      Board: DA0G7EMBAE0 rev:E
      SN: 5CD84312V7
      Please Do try this rebuilded your bin transfer windows and serial , already clean me region , give feedback
      Attached Files

      if you find these attachements useful please consider making a small donation to the site

        Comment

        • bravo
          Member
          • May 2011
          • 10
          #3
          Originally posted by kalilinux25

          Please Do try this rebuilded your bin transfer windows and serial , already clean me region , give feedback
          Still takes 2min to boot, and gives an errror message on boot "Manufacture Programming Mode is in Unlock Mode error!

          I'm starting to suspect there is some hardware issue and its not an ME problem

            Comment

            Previous template Next

            Related Topics

            Collapse
            • Destroyer-Br
              [HELP] ME Region Cleaning Request – Motherboard GK5MP5X 1.0
              by Destroyer-Br
              I’m working on a laptop in which I replaced the PCH, but I’m unable to clean or rebuild the Intel ME region using FIT.
              When I load my dump into FIT, it only shows the Intel(R) ME Kernel section. The full ME region structure does not appear.

              If I manually replace the ME region inside the decomp folder and try to build the image, FIT does generate an outimage.bin, but the file is corrupted.
              After flashing it, the board does not power on — no signs of life.

              I’ve identified that the issue happens because my original dump does not contain a complete or valid ME...
              11-23-2025, 02:48 PM
            • tom3k
              Dell Precision 5540. Need clean ME Region
              by tom3k
              Laptop: Dell Precision 5540
              MB: LA-H331P Rev: 1.0(A00)

              Hi.

              I am looking for a clean ME Region 12.0.95.2489 Corporate H CNP/CMP-H B, A
              After extracting my BIOS in FIT the ME Region size is 7565 KB.
              However the ME Region files I fouud online are 11688 KB in size.
              Can someone help me find he correct clean ME Region?
              Thanks!

              Code:
              ╟─────────────────────────────┬───────────────╢
║ Family │ CSE ME ║
╟─────────────────────────────┼───────────────╢
              ...
              06-28-2025, 12:34 PM
            • Adenitz
              Clean ME region - a bit of theory
              by Adenitz
              Hello laptop repair experts,
              can someone plese, help me understand the significance of cleaning ME region in a BIOS dump file?
              I know that Manegement Engine (ME) data is part of BIOS/UEFI firmware. I know that it contains some HW specific data for the particular laptop.
              What I don't know, why do I need to clean ME region if I try BIOS dump file from another laptop (of course same type and model). I'm not sure if this is only because of the serial number (not sure if that is stored in ME region at all).

              Recently, I had a two cases where laptops (one is Lenovo Idepad...
              10-21-2023, 04:44 AM
            • mkdj
              ASUS ZenBook UX480F : need help with cleaning the ME region of my BIOS dump
              by mkdj
              Dear all,
              I have a ASUS ZenBook UX480F with the following symptoms:



              I suspect it is a BIOS issue. So I decided to try to clean the ME region. I followed the guide on win-raid, and I believe I have done everything correctly. My problem is: when I open the outimage.bin in ME Analyzer, it says that it is Extracted, and not Region, Extracted as it should be. Is it normal, or did I do something not correctly? This is my first experience editing BIOS files.

              I would appreciate if someone could take time to explain the issue, so that I can learn. But I would...
              10-19-2025, 04:41 AM
            • Lexsmash85
              Bricked bios from a legion y540-15irh (81sx) . Needing dmi/clean me region maybe
              by Lexsmash85
              Edit: apologies, I only need help with the DMI info.. I thought the ME region would need attention in order to recover from bricked state but maybe I misunderstood.

              Im a novice to this experience but in short, I performed a backlash from the latest and final bios firmware BHCN45WW to BHCN26WW hoping that would solve an issue with keyboard functionality failing after an update. Ended up hanging during flash process and then system would no longer POST on reboot.

              USB recovery process didn't seem to take. So today I successfully managed to get the BIOS dump from my machine...
              08-06-2025, 03:41 AM
            • Loading...
            • No more items.
            Working...