HP Zbook 16 Fury G10

[peste]

HP ZBook Fury 16 G10 Mobile Workstation PC IDS Base Model

serial number: 5CG3224WD6
PROD ID : 78623AV
I NEED CONFIGIURED BIOS BCZ I TRY TOO MANY BIOS BUT DIDNT SOLVE MY ISSUE

post the original contents of the bios chip..

[Tanel87]

Please help with unlocking Fury 16 G10 main bios

[SMDFlea]

You must post the laptop serial number, please read the rules.

[knarfboy]

Hi guys, I need your help, I have a HP Zbook Fury G10 notebook.
I bought it at a bankruptcy auction.
Unfortunately, the notebook has a BIOS password.
Can anyone help me remove this? Serial number is 5CG4110VG8

Many thanks, Frank

[midinoroma]

hello please unock
sn 5CG4245010

[Casr543]

Hi my friends, please help unlock/remove Bios password, THX!!!!

Product Name : HP ZBook Fury 16 G10 Mobile Workstation PC
Serial Number: 5CG4090ZSN
ProdID: 97W26EC#ABM

[SMDFlea]

Thread merged.

[Stefan Steff]

Hi my friends, please help unlock/remove Bios password, THX!!!!

Product Name : HP ZBook Fury 16 G10 Mobile Workstation PC
Serial Number: 5CG4090ZSN
ProdID: 97W26EC#ABM

Try this patched file and if the password still present you need to read the EC chip (look on the other side of MB...probably a 16Mb chip...))

[CraterM]

Hi my friends, please help unlock/remove Bios password, THX!!!!

Product Name : HP ZBook Fury 16 G10 Mobile Workstation PC
Serial Number: 5CG4090ZSN
ProdID: 97W26EC#ABM

try and report:

[Casr543]

Try this patched file and if the password still present you need to read the EC chip (look on the other side of MB...probably a 16Mb chip...))

---

Hi, i already flashed the MAIN bios with both unlocked files with no luck, when i turn on the computer appears a message that the bios is updating, when it finishes and enters the bios is still locked by password.

I guess I took the wrong bios chip (both chips MAIN and EC are the same model "W25Q256JV") so here I attach the second bios file (EC Bios chip), I hope you can help me unlocking it. Thanks in advace!

[Casr543]

try and report:

Here are both chips that I desolder. I think one is the MAIN chip that corresponds to the first file I uploaded (right side) and the EC chip is the one in the left.

[volinakis]

---

Hi, i already flashed the MAIN bios with both unlocked files with no luck, when i turn on the computer appears a message that the bios is updating, when it finishes and enters the bios is still locked by password.

I guess I took the wrong bios chip (both chips MAIN and EC are the same model "W25Q256JV") so here I attach the second bios file (EC Bios chip), I hope you can help me unlocking it. Thanks in advace!

1st thing use BCU (BiosConfigUtility)with your original bios+EC to read your DMI, using cmd line "biosconfigutility /get:1.txt" -you'll need to write back your DMI.
write both chipsets with files I upload. At 1st boot enter in bios setup with F10 and in MAIN tab reset to factory defaults. Wait for 2-3 mins, laptop will restart few times with no image.
Use again BCU to read again DMI ( "biosconfigutility /get:2.txt"), open 2.txt and fill empty fields with values from 1.txt (Product Name, Serial Number, SKU, BuildID, Feature Byte, System Board CT Number, CirrusSmartAmpCalibrationData, MAC adress). Move * from HP MPM to Lock. Save 2.txt in "documents" then move it back in BCU folder. Apply new settings using cmd line "biosconfigutility /set:2.txt". Restart.